Fuels Ventilation Operation, To Start Heater

FUELS

VENTILATION

OPERATION

WARNING

Use only kerosene or No. 1 fuel oil to avoid risk of ﬁre or explosion. Never use gasoline, naphtha, paint thinners, alcohol, or other highly ﬂammable fuels.

Do not use heavy fuels such as No. 2 fuel oil or No. 2 Diesel. Using heavy fuels will result in:

•clogged fuel ﬁlter and nozzle

•the need of non-toxic anti-icer in fuel during very cold weather

IMPORTANT: Use a KEROSENE ONLY storage container. Be sure storage container is clean. Foreign matter such as rust, dirt, or water will cause the ignition control assembly to shut down the heater. Foreign matter may also require you to clean fuel system often.

WARNING

Follow the minimum fresh, outside air ventilation requirements. If proper fresh, outside air ventilation is not provided, carbon monoxide poisoning can occur. Provide proper fresh, outside air ventilation before running heater.

Provide at least a two-square-foot opening of fresh, outside air for each 50,000 Btu/Hr rating. Provide extra fresh air if more heaters are being used.

Example: A 50,000 Btu/Hr heater requires one of the following:

•a 16 foot two-car garage door raised two inches

•a 9 foot single-car garage door raised three inches

•two, thirty-inch windows raised five inches

WARNING

Review and understand the warnings in the Safety Informa- tion Section, pages 2 and 3. They are needed to safely operate this heater. Follow all local codes when using this heater.

To Start Heater

1.Follow all ventilation and safety information.

2.Fill fuel tank with kerosene or No. 1 fuel oil.

3.Attach fuel cap.

4.Plug power cord of heater into three-prong, grounded extension cord. Exten- sion cord must be at least six feet long.

Extension Cord Wire Size Requirements

6 to 10 feet long, use 18 AWG rated cord

11 to 100 feet long, use 16 AWG rated cord

101 to 200 feet long, use 14 AWG rated cord

5.Plug extension cord into standard 120 volt/60 hertz, three-hole, grounded outlet. Note: Ignitor will preheat for five seconds then heater will start.

To Stop Heater

1. Unplug extension cord from outlet.

To Restart Heater

1.	Wait ten seconds after stopping heater.
2.	Repeat steps under To Start Heater (see above).	5

102553

B50H, REM50C specifications

Desa B50H and REM50C are innovative solutions designed for advanced energy management and efficient operation in various applications. Both models embody a blend of cutting-edge technology and user-centric design, making them ideal for modern energy needs.

The Desa B50H, known for its robust performance, offers a high capacity and efficient energy output. This model is equipped with a powerful engine that ensures reliable operation while keeping fuel consumption at bay. The B50H features advanced thermal management systems that optimize engine temperature, thus extending the lifespan of the unit. Its user-friendly interface allows operators to monitor performance metrics seamlessly, ensuring effortless management of energy resources.

One of the key characteristics of the Desa B50H is its adaptability to different environmental conditions. Whether used in urban settings or remote locations, this model delivers stable performance, highlighting its versatility. Additionally, it incorporates noise reduction technologies, making it suitable for use in residential areas without disturbing the peace. The design prioritizes sustainability, integrating features that minimize emissions and promote eco-friendly usage.

On the other hand, the REM50C stands out with its exceptional connectivity options and smart technology integration. It is built with a focus on smart grid compatibility, allowing seamless communication with other energy systems. This capability enhances its efficiency, enabling real-time data exchange about energy consumption and demand. The REM50C also supports remote monitoring and control applications, allowing users to manage energy use from anywhere.

The REM50C incorporates advanced safety features, including overload protection and automated shutdown mechanisms, ensuring safe operation under various load conditions. Its compact design makes it easy to install, even in space-constrained environments. The model is engineered for durability, constructed with high-quality materials that withstand harsh conditions without compromising performance.

In summary, both the Desa B50H and REM50C represent significant advancements in energy management technology. The B50H is characterized by its robust performance and fuel efficiency, while the REM50C excels in smart technology integration and connectivity. Together, they offer versatile solutions suitable for a range of applications, from residential to industrial, catering to the evolving demands of energy management in today's world.