Storage, Maintenance, Specifications, To Stop Heater

OPERATION STORAGE MAINTENANCE SPECIFICATIONS

OPERATION

Continued

NOTICE: If heater is unplugged or power outage occurs while heater is running, the thermal limit device will stop fuel flow. A few seconds occur before the thermal limit device activates. During this short time, flames may appear outside the heater. This is normal. The flames will go out when thermal limit device activates.

TO STOP HEATER

1.Tightly close propane supply valve on propane tank(s).

2.Wait a few seconds. Heater will burn gas left in supply hose.

3.Unplug heater.

1.Keep heater clean. Clean heater annually or as needed to re- move dust and debris. If heater is dirty or dusty, clean heater with a damp cloth. Use household cleaners on difficult spots.

2.Inspect heater before each use. Check connections for leaks. Apply mixture of liquid soap and water to connections. Bubbles forming show a leak. Correct all leaks at once.

3.Inspect hose/regulator assembly before each use. If hose is highly worn or cut, replace with hose specified by manufacturer.

4.Have heater inspected yearly by a qualified service agency.

5.Keep inside of heater free from combustible and foreign ob- jects. Remove motor and other internal parts if needed to clean inside of heater (see Service Procedures, page 8).

6.Clean fan blades each season or as needed (see Fan, page 9).

TO RESTART HEATER

1.Wait five minutes after stopping heater.

2.Repeat steps under To Start Heater, page 5.

STORAGE

CAUTION: Disconnect heater from propane sup- ply tank(s).

1.Store propane tank(s) in safe manner. See Chapter 5 of Stan- dard for Storage and Handling of Liqueﬁed Petroleum Gases, ANSI/NFPA 58. Follow all local codes. Always store propane tanks outdoors.

2.Place plastic cover caps over brass ﬁttings on inlet connector and hose/regulator assembly.

3.Store in dry, clean, and safe place. Do not store hose/regulator assembly inside heater combustion chamber.

4.When taking heater out of storage, always check inside of heater. Insects and small animals may place foreign objects in heater. Remove motor and other internal parts if needed to re- move foreign objects (see Service Procedures, page 8).

MAINTENANCE

WARNINGS

•Never service heater while it is plugged in, con- nected to propane supply, operating, or hot. Se- vere burns and electrical shock can occur.

•Keep heater clear and free from combustible mate- rials, gasoline, and other flammable vapors and liquids.

•Do not block the flow of combustion or ventila- tion air.

SPECIFICATIONS

Output Rating (BTU/Hr)	30,000
Fuel	Propane Vapor Only
Fuel Consumption
Gallons/Hour	.33
Pounds/Hour	1.4
Supply Pressure To Regulator
Minimum (for purposes	20 psi
of input adjustment)
Maximum	Tank Pressure or 200 psi
Regulator Outlet Pressure	10 PSI
Manifold Pressure	10.1 PSI
Hot Air Output
(CFM Approx)	175
Motor	3045 RPM, 1/40 HP
Electric Input	120 volt/60 hertz
Amperage	.6
Ignition	Manual, Piezo
Temperature Range for	-20° F to 85° F*
Heater Operation
Weight (Pounds)
Heater	11
Shipping	13
Size - L x W x H (Inches)
Carton	19.4 x 9.75 x 14.75
Heater	18.5 x 7.7 x 12.8

*When running heater in temperatures above 85° F, high internal temperatures may cause thermal limit device to shut down heater.

For morevisit www..com

104163-01H

REM30LP specifications

Desa REM30LP is a cutting-edge, energy-efficient heating solution designed for residential and commercial spaces. Characterized by its advanced technology, the REM30LP delivers optimal performance while ensuring a comfortable environment. This unit operates on LP (liquid propane) gas, making it a practical choice for homes and businesses seeking an effective heating alternative.

One of the main features of the Desa REM30LP is its impressive heating capacity. It can provide warmth for areas up to 1,000 square feet, making it suitable for large living rooms, workshops, or commercial settings. The unit utilizes a forced air heating system that rapidly circulates warm air, ensuring that every corner of the space is heated uniformly.

Another key characteristic of the REM30LP is its compact design. Unlike traditional heaters, which can be bulky and difficult to position, the REM30LP's sleek profile allows it to fit neatly in various locations without occupying significant floor space. This makes it an attractive option for users with limited room or those looking to maintain an uncluttered aesthetic.

The Desa REM30LP integrates several advanced technologies to enhance its performance and energy efficiency. One notable feature is its electronic ignition system, which eliminates the need for matches or lighter fluid. This not only improves safety but also ensures reliable starts every time the heater is activated. Additionally, the unit boasts safety features such as automatic shut-off systems and tip-over protection, providing peace of mind for homeowners.

Efficiency is further maximized by the heater's adjustable thermostat. Users can easily set their preferred temperature, and the REM30LP will automatically adjust its output to maintain consistent heating levels. This precision helps to save on energy costs while ensuring comfort.

In terms of installation, the Desa REM30LP offers versatility. It can be vented directly outdoors, allowing for a more flexible installation process in various spaces. This feature is particularly beneficial in homes where interior venting may not be feasible.

In conclusion, the Desa REM30LP is a compact, efficient, and effective heating solution that is perfect for a range of environments. With its advanced technologies, versatile installation options, and robust safety features, it stands out as a reliable choice for those in need of high-quality heating.