Desa VP10T Installing to Wall, Installing Two Mounting Screws, Placing Heater On Mounting Screws

Page 7

OWNER’S MANUAL

INSTALLING TO WALL

Continued

Installing Two Mounting Screws

Note: Wall anchors and mounting screws are in hardware package. The hardware pack- age is provided with heater.

Attaching to wall stud method

For attaching mounting screw to wall stud

1.Drill hole at marked location using 9/64" drill bit.

2.Insert mounting screw into wall stud.

3.Tighten screw until 1/16" space (thick- ness of penny) is between screwhead and wall.

Attaching to wall anchor method

Follow instructions below to attach mount- ing screws to hollow walls (wall areas be- tween studs) or solid walls (concrete or masonry).

1.Drill holes at marked locations using 5/16" drill bit. For solid walls (concrete or masonry), drill at least 1 1/4" deep.

2.Fold wall anchor (see Figure 6).

Figure 6 - Folding Anchor

3.Insert wall anchor (wings first) into hole. Tap anchor flush to wall.

4.For thin walls (1/2" or less), insert red key into wall anchor. Push red key to “pop” open anchor wings (see Figure 7). IMPORTANT: Do not hammer key!

For thick walls (over 1/2" thick) or solid walls, do not pop open wings.

Thin Walls

(1/4" to 1/2" thick)

Figure 7 - Popping Open Anchor Wings For Thin Walls

5.Tighten two screws until 1/16" space (thickness of penny) is between screwheads and wall (see Figure 8).

Thin or Thick Wall

(thick wall

shown)

1/16" Space

Solid

Wall

ANCHOR

Figure 8 - Tightening Anchors

Placing Heater On Mounting Screws

1.Locate two keyhole slots on back panel of heater (see Figure 9).

2.Place large openings of slots over screwheads. Slide heater down until screws are in small portion of slots.

Keyhole Slots

Figure 9 - Location Of Keyhole Slots On Back Panel Of Heater

Removing Front Panel Of Heater

1.Remove two screws near bottom cor- ners of front panel.

2.Lift straight up on grill guard until it stops. Grill guard will slide up about 1/4".

3.Pull bottom of front panel forward, then down.

Figure 10 - Removing Front Panel Of Heater

Installing Bottom Mounting Screw

1.Locate bottom mounting hole. This hole is near bottom on back panel of heater (see Figure 11).

2.Mark screw location on wall.

3.Remove heater from wall.

4.If installing bottom mounting screw into hollow or solid wall, install wall anchor. Follow steps 1 through 5 under Attaching To Wall Anchor Method.

If installing bottom mounting screw into wall stud, drill hole at marked lo- cation using 9/64" drill bit.

5.Replace heater on wall.

6.Insert bottom anchor screw through back panel into bottom anchor or drilled hole (see Figure 11).

7.Tighten screw until heater is firmly se- cured to wall. Do not over tighten.

Note: Do not replace front panel at this time. Replace front panel after making gas connections and checking for leaks (see pages 8 and 9).

Figure 11 - Installing Bottom Mounting Screw

102489

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Infrared VENT-FREE PROPANE/LP GAS Heater OWNER’S Operation and Installation ManualModel VP10T Vanguard VP10T PROPANE/LP GAS Heater Safety InformationLocal Codes Product FeaturesProduct AIR for Combustion and VentilationDetermining if You Have a Confined or Unconfined Space Unusually Tight ConstructionDetermining AIR Flow for Heater Location Confined and Unconfined SpaceVentilation Air From Inside Building Ventilation AIRVentilation Air From Outdoors Wall Installing toPlacing Heater On Mounting Screws Installing to WallInstalling Two Mounting Screws Installing Bottom Mounting ScrewSediment Trap Connecting to GAS SupplyChecking GAS Connections Pressure Testing GAS Supply Piping SystemPressure Testing Heater GAS Connections For Your Safety Read Before LightingThermostat Control Operation Manual Lighting ProcedureLighting Instructions To Turn OFF GAS To ApplianceInspecting Burner Cleaning and MaintenanceObserved Problem Possible Cause Remedy TroubleshootingTroubleshooting Gas leak. See Warning statement at Service Hints SpecificationsTechnical Service Publications Replacement PartsVP10T ODS/PILOT Illustrated Parts ListParts Available not Shown Vanguard VP10T PROPANE/LP GAS Heater 102489 Limited Warranty Vanguard VENT-FREE Residential GAS Heaters Warranty Information

VP10T specifications

The Desa VP10T is an innovative piece of technology designed to meet the evolving needs of modern living. This versatile device has garnered attention for its blend of functional design, advanced features, and user-friendly operation, making it an attractive option for a wide range of consumers.

One of the standout features of the Desa VP10T is its compact size, allowing it to seamlessly fit into various environments, whether it’s a small apartment, a home office, or a shared workspace. Despite its compactness, the VP10T boasts impressive performance capabilities, ensuring that users do not have to compromise on efficacy in a smaller footprint.

Another key characteristic of the Desa VP10T is its energy efficiency. Equipped with the latest energy-saving technologies, this device helps reduce electricity consumption without sacrificing performance. This is particularly appealing in today’s environmentally conscious world, where consumers are increasingly looking for products that contribute to sustainability.

The Desa VP10T also prioritizes user experience with its intuitive interface. Featuring touch controls and an easy-to-navigate menu, users can effortlessly adjust settings to suit their preferences. Whether it involves customizing the output levels or setting timers for specific functions, the VP10T makes it easy for anyone to operate.

In terms of technological integration, the Desa VP10T supports smart connectivity. This allows users to control the device remotely through a dedicated smartphone app. With this feature, users can monitor performance, receive updates, and even schedule operations, offering convenience that aligns with the demands of contemporary lifestyles.

Safety is another significant aspect of the Desa VP10T. Built-in safety features such as overheat protection and automatic shut-off mechanisms ensure peace of mind for users. These features are essential for families and individuals, providing an added layer of security.

Overall, the Desa VP10T stands out due to its blend of size, efficiency, user-friendliness, and advanced technological integration. With its commitment to sustainability and safety, this device is not just a tool for daily tasks; it is a step towards making life easier and more environmentally responsible. Whether you're looking to enhance your living space or streamline your daily routine, the Desa VP10T offers a solution that is both practical and forward-thinking.
Top Page Image Contents