Safety Information

Continued

WARNINGS Continued

Make certain you read and understand all Warnings. Keep this manual for reference. It is your guide to safe and proper operation of this heater.

•Use only kerosene or No. 1 fuel oil to avoid risk of ﬁre or explosion. Never use gasoline, naphtha, paint thinners, alcohol, or other highly ﬂammable fuels.

•Fueling

a)Personnel involved with fueling shall be qualified and thoroughly familiar with the manufacturer’s instructions and applicable federal, state, and local regulations regarding the safe fueling of heating units.

b)Only the type of fuel specified on the heater’s data plate shall be used.

c)All flame, including the pilot light, if any, shall be extinguished and the heater allowed to cool, prior to fueling.

d)During fueling, all fuel lines and fuel-line connections shall be inspected for leaks. Any leaks shall be repaired prior to returning the heater to service.

e)At no time shall more than one day’s supply of heater fuel be stored inside a building in the vicinity of the heater. Bulk fuel storage shall be outside the structure.

f)All fuel storage shall be located a minimum of 25 feet (762 cm) from heaters, torches, welding equipment, and similar sources of ignition (exception: the fuel reservoir integral with the heater unit).

g)Whenever possible, fuel storage shall be confined to areas where floor penetrations do not permit fuel to drip onto or be ignited by a fire at lower elevation.

h)Fuel storage shall be in accordance with the authority having jurisdiction.

•Never use heater where gasoline, paint thinner, or other highly ﬂammable vapors are present.

•Follow all local ordinances and codes when using heater.

•Use only in well vented areas. Provide at least three square feet (2800 square cm) of fresh, outside air for each 100,000 Btu/Hr of rating.

•Use only in places free of ﬂammable vapors or high dust content.

•Use only with the electrical voltage and frequency speciﬁed on model plate.

•Use only a three-prong, grounded (earthed) extension cord.

•Heaters used in the vicinity of tarpaulins, canvas, or similar enclosure materials shall be located a safe distance from such materials. The recommended mini- mum safe distance is 10 feet (304.8 cm). It is further recommended that these enclosure materials be of a fire retardant nature. These enclosure materials shall be securely fastened to prevent them from igniting or from upsetting the heater due to wind action.

•Minimum heater clearances from combustibles:

Outlet: 8 Ft. (250 cm)

Top, Rear, and Sides: 4 Ft. (125 cm)

•Locate heater on a stable and level surface while hot or running or a ﬁre may occur.

•When heater is moved or stored, it must be in a level position or fuel spillage may occur.

•Keep children and animals away from heater.

•Unplug heater when not in use.

•This heater has a built-in thermostat. Plugged-in heater may start at anytime.

•Never use heater in living or sleeping areas.

•Never block air inlet (rear) or air outlet (front) of heater.

•Never move, handle, refuel, or service a hot, operating, or plugged in heater.

•Never attach duct work to front or rear of heater.

101964

B350CE specifications

The Desa B350CE is a highly regarded model that combines functionality, efficiency, and modern features, making it an attractive choice for professionals and hobbyists alike. This device is primarily recognized for its innovative approach to comfort and sustainability, positioning itself as a versatile option in its category.

One of the standout features of the Desa B350CE is its advanced heating technology. The model employs a state-of-the-art combustion system, allowing for efficient fuel consumption while delivering powerful heating output. This aspect is particularly appreciated in colder climates, where maintaining a consistent and comfortable temperature is vital. The B350CE is capable of quickly heating spaces, making it suitable for various applications, including workshops and residential settings.

The Desa B350CE also includes smart controls that enhance user experience. With an intuitive interface, it allows users to easily adjust settings and monitor performance, ensuring optimal operation. These controls support temperature regulation, enabling users to maintain their desired comfort levels with minimal effort. Furthermore, its programmable timer function adds a layer of convenience, allowing for pre-scheduled heating cycles.

Another significant characteristic of the Desa B350CE is its focus on safety. It incorporates multiple safety features such as overheat protection and automatic shut-off capabilities. These features are designed to prevent accidents and offer peace of mind, especially in busy environments where oversight is common. The robust build quality of the unit ensures longevity, further emphasizing its reliability for long-term use.

The energy efficiency of the Desa B350CE cannot be overlooked. It is designed to operate efficiently, reducing fuel consumption and lowering operational costs. As users become more environmentally conscious, this model aligns with sustainability goals by providing effective heating solutions while minimizing its carbon footprint.

In summary, the Desa B350CE stands out in the market with its powerful performance, user-friendly controls, and commitment to safety and efficiency. With its innovative features, it caters to a wide range of heating needs, making it a worthwhile investment for anyone seeking effective and reliable heating solutions. This combination of technology and practical design makes the Desa B350CE a leader in its class.