Quadra-Fire Mobile Home Installation Tips for Isle Royale Wood Stove
Page 15

R

Isle Royale Wood Stove

MOBILE HOME INSTALLATION

You must use a Quadra-Fire Outside Air Kit Part 831-1780 for installation in a mobile home.

1. An outside air inlet must be provided for combustion and must remain clear of leaves, debris, ice and/or snow. It must be unrestricted while stove is in use to prevent room air starvation which can cause smoke spillage and an inability to maintain a fire. Smoke spillage can also set off smoke alarms.

Spark Arestor Cap

2.Stove must be secured to the mobile home structure. Use 1/4 inch (6mm) lag bolts with the appropriate length for your installation to secure stove through pad and into floor.

3.Stove must be grounded with #8 solid copper grounding wire or equivalent and terminated at each end with N.E.C. approved grounding device.

4.Stove must be installed with an approved UL103 HT ventilated chimney connector, UL103 HT chimney, and terminal cap with spark arrestor. Never use a single wall connector (stove pipe) in a mobile home installation. Use only double-wall connector pipe, Dura-Vent DVL, Selkirk metalbestos DS, Security DL double wall connector or any listed double wall pipe connector.

5.Refer to page 6t of this manual or the Serial Number label on the back of the stove for clearances to combustibles.

Storm Collar

Joist Shield/Firestop

Floor Protector

Roof Flashing

Listed Chimney Connector

Outside Air Kit Connector

6.Floor protections requirements on page 7 must be followed precisely.

Outside Air Floor Vent

7.In Canada, this appliance must be connected to a 6 inch (152mm) factory-built chimney conforming to CAN/ULC-629M, STANDARD FOR FACTORY BUILT CHIMNEYS. Floor protection referenced on page 7 must be followed.

8.Use silicone to create an effective vapor barrier at the location where the chimney or other component penetrates to the exterior of the structure.

9.Follow the chimney and chimney connector manufacturer’s instructions when installing the flue system for use in a mobile home.

NOTE: Offsets from the vertical, not exceeding 45°, are allowed per Section 905(a) of the Uniform Mechanical Code (UMC). Offsets greater than 45° are considered horizontal and are also allowed, providing the horizontal run does not exceed 75% of the vertical height of the vent. Construction, clearance and termination must be in compliance with the UMC Table 9C. This installation also complies with NFPA 211.

WARNING: NEVER DRAW COMBUSTION AIR FROM A WALL, FLOOR OR CEILING CAVITY OR FROM ANY ENCLOSED SPACE SUCH AS AN ATTIC OR GARAGE.

CAUTION: THE STRUCTURAL INTEGRITY OF THE MOBILE HOME FLOOR, WALL AND CEILING/ROOF MUST BE MAINTAINED. (i.e.,

DO NOT CUT THROUGH FLOOR JOIST, WALL STUD, CEILING TRUSS, ETC.)

WARNING: DO NOT INSTALL

IN SLEEPING ROOM.

NOTE: Top sections of chimney must be removable to allow maximum clearance of 13.5 ft. (411cm) from ground level for transportation purposes.

10. Burn wood only. Other types of fuels may generate poisonous gases (e.g., carbon monoxide).

11 If unit burns poorly while exhaust blower is on in home, (i.e. kitchen range hood) increase combustion air.

 

 

 

 

February 4, 2005

250-5763B

Page 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Isle Royale Important Safety NotesModel Name Test LabReport No Table of Contents Isle Royale Wood Stove Listings and Safety Notices Dimensions Label is Located on the Back of the Stove Vent SpecificationsFront View Side View Max Omni Test Laboratories, Inc Report Ntumber 061-S-18-2Floor Protection Locating Your StoveUSA Required Canada Recommended Material Reversible Flue CollarRear Flue Deflector Cover Plate Chimney Height Requirements / Draft Masonry Chimney Flue SystemsSolid Pack Chimney with Metal Supports AS a Thimble Wall Band to Solid Pack Chimney with Metal Supports AS a Thimble ContdConnection to a Masonry Fireplace Exterior Chimney Connection to a Metal Prefabricated ChimneySleeping Room Mobile Home InstallationInstallation of Optional Blower Outside AIR KIT InstallationAIR Controls Operating InstructionsBTU / Hr Start-Up Air Control Primary Air Slide Control Heat Output SettingsOperating Instructions Cont’d Operating the TOP Loading OptionOpacity Building a FireBurn Rates Wood Selection and StorageOptional Blower Operating Instructions Maintenance Replace with 5mm ceramic glass only Maintenance ContdGlass Replacement Glass CareFirebrick Replacement Nbr Brick Size QtyDoor & Gasket Isle Royale Wood Stove Service Parts Serial No Accessories Serial NoAppliances Service and Maintenance Log Lifetime Warranty Your Records for Model

Isle Royale specifications

The Quadra-Fire Isle Royale is a premier wood-burning stove that exemplifies innovation, efficiency, and craftsmanship. Designed to provide reliable heating for homes and cabins, it combines traditional aesthetics with modern technology to deliver a user-friendly experience while enhancing comfort.

One of the standout features of the Isle Royale is its impressive heat output. Capable of heating spaces up to 2,000 square feet, it utilizes a powerful firebox that maximizes combustion efficiency. With a capacity of up to 3.2 cubic feet, this stove allows for longer burn times, meaning homeowners can enjoy consistent warmth without the frequent need to reload firewood.

The stove also incorporates advanced technologies that optimize performance. Its patented Quadra-Fire Four-Point Burn System ensures a complete burn of the fuel, minimizing smoke emissions while maximizing heat production. This system enhances the stove's efficiency by promoting a secondary burn that ignites unburned gases, thus producing more heat from the same amount of fuel. The result is a cleaner combustion process that is better for the environment and enhances indoor air quality.

Durability is another hallmark of the Isle Royale. Constructed from heavy-gauge steel and featuring a robust cast-iron door, this stove is built to withstand the rigors of daily use. The high-quality materials not only provide longevity but also contribute to the stove's classic appearance, which can seamlessly integrate into a variety of decorating styles.

Convenience is also addressed with features such as an easy-to-use air control system, which allows users to adjust the burn rate according to their heating needs. Additionally, the stove includes a large viewing window and a state-of-the-art ceramic glass that withstands high temperatures while providing a beautiful view of the flames. This focal point adds an aesthetic charm to any living space, creating a warm and inviting atmosphere.

Moreover, the Isle Royale meets stringent EPA certification standards, ensuring that it operates cleanly and efficiently. Its commitment to eco-friendliness makes it a smart choice for environmentally conscious consumers who still wish to enjoy the comfort and ambiance of a traditional wood-burning stove.

In summary, the Quadra-Fire Isle Royale wood stove is a blend of efficiency, durability, and style, offering homeowners an exceptional heating solution that doesn't compromise on performance. With its advanced technology and thoughtful design, it stands out as a top choice for anyone seeking to enhance their home with the warmth of wood fire.
Top Page Image Contents