Quadra-Fire Complete Guide to Installing Your Isle Royale Electric Heater
Page 16

R

Isle Royale Wood Stove

OUTSIDE AIR KIT INSTALLATION

Included in Kit: 1 flex flange; 2 cable ties; oustide air termination cap; mounting screws (Discard the remaining parts).

Items Needed for Installation: 4 inch (102mm) diameter flex pipe in the length as required for your installation; Phillips screwdriver; Silicone sealant; Drills and saws necessary for cutting holes through the wall or flooring in your home.

1. Remove all materials from packing box.

2.Mount the flex flange (with pipe fitting extending out), over the intake air opening at the rear of stove using the four mounting screws supplied with kit.

3.Cut a 4 inch (102mm) minimum hole in the floor or wall to accommodate outside air piping. Use 4 inch (102mm) metal flex or rigid piping to directly connect outside air to the unit or into vented crawl space. (Do not put flex into a non-vented crawl space). If using flex tubing attach cable ties to secure tubing at both ends. Use the supplied termination cap with a rodent screen. Seal between the floor or wall and the pipe with silicone to prevent moisture penetration.

OUTSIDE AIR

TERMINATION CAP (contains rodent screen)

FLEX FLANGE

NOTE: If you plan to install the optional blower and the outside air kit, complete installation of the outside air kit first.

NOTE: If using Hearth Legs, you can install an Outside Air Kit or Blower, but not both.

INSTALLATION OF OPTIONAL BLOWER

The blower is shipped fully assembled and ready for installation.

1.Remove 3 Phillips head screws from rear of unit.

2.Using the Phillips head screws, attach blower to lower rear of stove, as shown.

3.Plug blower cord into a grounded outlet. Do not remove ground prong from plug. Route power cord to avoid heat from the stove, or other damage. Do not route cord under or in front of appliance.

4.Adjust the blower speed control to the desired speed.

ADJUSTING THE BLOWER SPEED CONTROL,*

If Necessary

NOTE: When the speed control is turned clockwise, it will click on to high speed. Turn the speed control clockwise to decrease the speed. At full clockwise, the blower should blow gently, but should not stop.

1.With the unit plugged in, turn the speed control knob to slow (full clockwise).

2.With a small screwdriver, adjust the blower speed by turning the adjustment mechanism through the hole on the side of the speed control.

3.Adjust the speed so the blower runs slowly, but does not stop. Turn clockwise to slow the blower and counterclockwise to increase the speed.

*The blower speed control for this unit is adjusted at the factory, and normally does not require further adjustment.

Rear Shield

Blower Mounting

Flange

Mounting Bar

Blower Speed Control

Blower

Mounting

Flange

Mounting Bar

Rear

Shield

 

 

 

 

Page 16

250-5763B

February 4, 2005

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Important Safety Notes Isle RoyaleTest Lab Model NameReport No Table of Contents Isle Royale Wood Stove Listings and Safety Notices Vent Specifications Dimensions Label is Located on the Back of the StoveFront View Side View Omni Test Laboratories, Inc Report Ntumber 061-S-18-2 MaxLocating Your Stove Floor ProtectionUSA Required Canada Recommended Reversible Flue Collar MaterialRear Flue Deflector Cover Plate Chimney Height Requirements / Draft Flue Systems Masonry ChimneySolid Pack Chimney with Metal Supports AS a Thimble Solid Pack Chimney with Metal Supports AS a Thimble Contd Wall Band toConnection to a Masonry Fireplace Connection to a Metal Prefabricated Chimney Exterior ChimneyMobile Home Installation Sleeping RoomOutside AIR KIT Installation Installation of Optional BlowerOperating Instructions AIR ControlsHeat Output Settings Operating Instructions Cont’dOperating the TOP Loading Option BTU / Hr Start-Up Air Control Primary Air Slide ControlBuilding a Fire OpacityWood Selection and Storage Burn RatesOptional Blower Operating Instructions Maintenance Maintenance Contd Glass ReplacementGlass Care Replace with 5mm ceramic glass onlyNbr Brick Size Qty Firebrick ReplacementDoor & Gasket Isle Royale Wood Stove Accessories Serial No Service Parts Serial NoAppliances Service and Maintenance Log Lifetime Warranty Your Records for Model

Isle Royale specifications

The Quadra-Fire Isle Royale is a premier wood-burning stove that exemplifies innovation, efficiency, and craftsmanship. Designed to provide reliable heating for homes and cabins, it combines traditional aesthetics with modern technology to deliver a user-friendly experience while enhancing comfort.

One of the standout features of the Isle Royale is its impressive heat output. Capable of heating spaces up to 2,000 square feet, it utilizes a powerful firebox that maximizes combustion efficiency. With a capacity of up to 3.2 cubic feet, this stove allows for longer burn times, meaning homeowners can enjoy consistent warmth without the frequent need to reload firewood.

The stove also incorporates advanced technologies that optimize performance. Its patented Quadra-Fire Four-Point Burn System ensures a complete burn of the fuel, minimizing smoke emissions while maximizing heat production. This system enhances the stove's efficiency by promoting a secondary burn that ignites unburned gases, thus producing more heat from the same amount of fuel. The result is a cleaner combustion process that is better for the environment and enhances indoor air quality.

Durability is another hallmark of the Isle Royale. Constructed from heavy-gauge steel and featuring a robust cast-iron door, this stove is built to withstand the rigors of daily use. The high-quality materials not only provide longevity but also contribute to the stove's classic appearance, which can seamlessly integrate into a variety of decorating styles.

Convenience is also addressed with features such as an easy-to-use air control system, which allows users to adjust the burn rate according to their heating needs. Additionally, the stove includes a large viewing window and a state-of-the-art ceramic glass that withstands high temperatures while providing a beautiful view of the flames. This focal point adds an aesthetic charm to any living space, creating a warm and inviting atmosphere.

Moreover, the Isle Royale meets stringent EPA certification standards, ensuring that it operates cleanly and efficiently. Its commitment to eco-friendliness makes it a smart choice for environmentally conscious consumers who still wish to enjoy the comfort and ambiance of a traditional wood-burning stove.

In summary, the Quadra-Fire Isle Royale wood stove is a blend of efficiency, durability, and style, offering homeowners an exceptional heating solution that doesn't compromise on performance. With its advanced technology and thoughtful design, it stands out as a top choice for anyone seeking to enhance their home with the warmth of wood fire.
Top Page Image Contents