Customer care, Thank you | Rangemaster Toledo FS Hob instruction

INSTALLATION

Check the appliance is electrically safe and gas sound when you have ﬁnished.

If a replacement cable is ﬁtted it must be 250v high temperature rubber/synthetic of 0.75mm2 minimum conductor size. Connect the replacement cable to the terminal block on the hotplate as shown.

Plug connection)

For a plug connection a three pin plug to BS1363 with a capacity of not less than 13 ampere must be used and ﬁtted with a 3 ampere fuse ‘ASTA’ approved to BS 1362.

After replacing the fuse the cover must be reﬁtted. If the cover is lost, the plug must not be used until a replacement cover has been obtained from your supplier. The colour of the correct fuse carrier is that of the coloured insert in the base of the fuse recess, or stated elsewhere on the plug. Always state this colour when ordering a replacement fuse carrier.

IMPORTANT The wires in the mains lead are coloured in accordance with the following code:-

GREEN AND YELLOW:	EARTH
BLUE:	NEUTRAL
BROWN:	LIVE

The wires should be connected into the terminal of your plug as shown:

POLARITY CHECK

The hotplate must be connected to the power supply. Your meter should be set on 300V ac scale.

Test at the hotplate terminal block:

1.Test leads from L to N. Your meter should read approx. 220-240V ac.

2.Test leads from L to E. Your meter should read approx. 220-240V ac.

3.Test leads from N to E. Your meter should read approx. 0-15V ac.

If the readings are diﬀerent from these values there is an electrical fault. Rectify any fault and repeat the test. If necessary repeat the test at the supply system socket/spur

-if the fault also occurs at this stage then there is a house system fault which requires attention by the Electrical Authority.

The customer should be warned NOT to use the appliance until this examination has been carried out.

Hotplate

Check each burner in turn. There is a spark ignition system that works when the knob is pressed in. Each burner also has a special safety device that stops the ﬂow of gas if the ﬂame goes out.

Push in and turn a knob to the large ﬂame symbol ().

Keep holding the knob pressed in to let the gas through to the burner for few seconds. The igniter should spark and light the gas.

If, when you let go of the control knob, the burner goes out, the safety device has not held in. Turn the control to the oﬀ position and wait one minute, then try again this time holding in the control knob for slightly longer.

Customer care

Please complete your contact details in the front of this section. Please inform the user how to operate the hotplate and hand over the instruction pack.

Thank you.

Electrical checks

EARTH CONTINUITY CHECK

The hotplate must be disconnected from the power supply. Set your meter to (ohm) on the X1 scale and adjust to zero if necessary.

Test the leads from the earth connection on the hotplate terminal, to the earth pin on the hotplate plug. The resistance should be less than 1 (ohm). If it is not, check all the earth wires for continuity. Check that all contacts are clean and tight. Re-check. If the resistance is still greater than 1 (ohm) there may be a problem, consult a qualiﬁed electrical engineer.

U108900-02

Toledo FS Hob specifications

The Rangemaster Toledo FS Hob is a modern cooking appliance that epitomizes sophistication and functionality, making it a favorite among culinary enthusiasts and professional chefs alike. This elegant induction hob combines cutting-edge technology with sleek design, delivering an outstanding cooking experience.

One of the standout features of the Toledo FS Hob is its advanced induction cooking technology. Induction hobs use electromagnetic energy to directly heat pots and pans, resulting in faster cooking times and greater energy efficiency. Unlike traditional gas or electric hobs, the Toledo FS provides an instant and precise control over cooking temperatures, allowing for meticulous cooking techniques. This not only enhances cooking efficiency but also helps maintain a safer kitchen environment, as the surface remains cooler to the touch.

The Toledo FS Hob offers multiple cooking zones, each equipped with varying power levels to cater to different culinary needs. The zones can be activated independently or combined for larger cookware, making it versatile for various cooking styles. Additionally, the hob features a boost function, delivering extra power for those moments when you need to boil water quickly or sear meat effectively.

Safety is a priority in the design of the Toledo FS. The hob is equipped with child lock features, ensuring that the hob cannot be accidentally turned on, providing peace of mind in family kitchens. Moreover, it has an automatic shut-off function that activates when a pot is removed from the cooking zone, minimizing the risk of overheating or accidents.

The sleek glass ceramic surface of the Toledo FS Hob not only enhances its aesthetic appeal but also makes it easy to clean. Spills and stains can be wiped away effortlessly, allowing users to maintain a tidy kitchen workspace without the hassle of scrubbing.

In addition to performance and safety features, the Rangemaster Toledo FS Hob also offers intuitive touch controls, enabling precise adjustments even with wet hands. This ensures a seamless cooking experience, offering both ease of use and a touch of modern sophistication.

In summary, the Rangemaster Toledo FS Hob is a remarkable addition to any kitchen. With its induction technology, multiple cooking zones, safety features, and easy-to-clean surface, it strikes the perfect balance between form and function, making it an ideal choice for those who appreciate quality and efficiency in their cooking appliances.