Rangemaster Toledo FS Hob Pressure testing, Fixing the Hotplate, Electrical Connection, Pressures

Page 15

INSTALLATION

Check the appliance is electrically safe and gas sound when you have finished.

For LP Gas it should be capable of 50mbar pressure, 70°C temperature rise and carry a red stripe, band or label.

WARNINGS:

Ensure that the gas supply pipe is never able to touch moveable parts of the built-in cabinet (e.g. drawers). It must not pass through compartments that could be used for storage purposes. When using a flexible hose, it is essential to comply with the following instructions:

-No part of the pipe must be able to touch parts the temperature of which exceeds 75°C

-The pipe must not be pulled or twisted, throttled or tightly bent.

-It must not come into contact with sharp edges or corners.

-It must be easy to inspect the entire pipe length in order to check its state of wear.

-The pipe must be replaced within the date stamped on the pipe itself.

If in doubt contact, your supplier.

After completing the gas connection, check the hotplate is gas sound with a pressure test.

under side of the hotplate showning the foam seal

If the surface that the hotplate is to be fitted to is tiled, or is not reasonably smooth, additional sealing with a waterproof silicone sealant may be required.

Turn the hotplate back the right way up and fix it to the worktop with the brackets.

Pressure testing

The gas pressure can be measured at one of the centre hotplate burner injectors (not the Wok burner). Lift off a burner head. Fit the pressure gauge to the injector. Turn on and light one of the other hotplate burners. Turn on and push in the control knob for the burner with the pressure gauge fitted to let gas through.

Pressures

Natural Gas

LP Gas hotplates

 

 

 

 

20mbar.

Butane

29mbar

 

Propane

37mbar

Turn off the burners. Reassemble burner top, making sure it is reassembled in the correct way on the burner body.

Fixing the Hotplate

The hotplate must be sealed to the work surface to prevent liquid from infiltrating into the cabinet. A foam tape seal is supplied with the hotplate. Carefully follow these instructions in order to correctly apply this seal:

Turn the hotplate over and place in on a secure level surface. Detach the foam seal from the backing, checking that the transparent protection still adheres to the

seal itself. Position seal carefully along the edge of the hotplate. Take special care in the corners making sure there are no gaps. The ends of the strips must fit together without overlapping.

Ensure the tag fits into the slot on the hotplate base, then tighten the screw until it is locked to the worktop.

Electrical Connection

This appliance must be installed by a qualified electrician to comply with the relevant Institute of Electrical Engineers (I.E.E.) regulations and also the local electricity supply company requirements.

WARNING: THIS APPLIANCE MUST BE EARTHED

Note

All external wiring must comply with the IEE Regulations for the Electrical Equipment of Buildings. Connection to the electrical supply can be made with either a plug and socket or be permanently wired via a double pole switch. The cooker is supplied with a 3 core cable 2m long.

15

U108900-02

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Users Guide U108900-02 Be safeGas and Electricity on Peculiar smellsContents U108900 Hotplate BurnersWarmer Griddle optional extra High/mediumMedium/low Wok cradle optional extra Care and CleaningWok burner Cleaning your hotplateHotplate burners Single ring burnersCleaning Table Hotplate Part Finish Recommended Cleaning MethodOutside of Hotplate 0800 111 TroubleshootingGeneral Safety Instructions If you smell gasClean only parts listed in this guide Location of Hotplate InstallationDear Installer Provision of VentilationYou will also need the following tools Checking the partsPositioning the Hotplate Moving the Hotplate Conversion to LPGas Connection Pressures Pressure testingFixing the Hotplate Electrical ConnectionCustomer care Thank youElectrical checks Tap adjustment Conversion to LP gasInjectors Stick on label U108900-02 Circuit Diagram Warmer ElementCode Colour Ratings Natural Gas Hotplate Technical DataDimensions ConnectionsU108900-02 U108900-02 U108900-02 230207

Toledo FS Hob specifications

The Rangemaster Toledo FS Hob is a modern cooking appliance that epitomizes sophistication and functionality, making it a favorite among culinary enthusiasts and professional chefs alike. This elegant induction hob combines cutting-edge technology with sleek design, delivering an outstanding cooking experience.

One of the standout features of the Toledo FS Hob is its advanced induction cooking technology. Induction hobs use electromagnetic energy to directly heat pots and pans, resulting in faster cooking times and greater energy efficiency. Unlike traditional gas or electric hobs, the Toledo FS provides an instant and precise control over cooking temperatures, allowing for meticulous cooking techniques. This not only enhances cooking efficiency but also helps maintain a safer kitchen environment, as the surface remains cooler to the touch.

The Toledo FS Hob offers multiple cooking zones, each equipped with varying power levels to cater to different culinary needs. The zones can be activated independently or combined for larger cookware, making it versatile for various cooking styles. Additionally, the hob features a boost function, delivering extra power for those moments when you need to boil water quickly or sear meat effectively.

Safety is a priority in the design of the Toledo FS. The hob is equipped with child lock features, ensuring that the hob cannot be accidentally turned on, providing peace of mind in family kitchens. Moreover, it has an automatic shut-off function that activates when a pot is removed from the cooking zone, minimizing the risk of overheating or accidents.

The sleek glass ceramic surface of the Toledo FS Hob not only enhances its aesthetic appeal but also makes it easy to clean. Spills and stains can be wiped away effortlessly, allowing users to maintain a tidy kitchen workspace without the hassle of scrubbing.

In addition to performance and safety features, the Rangemaster Toledo FS Hob also offers intuitive touch controls, enabling precise adjustments even with wet hands. This ensures a seamless cooking experience, offering both ease of use and a touch of modern sophistication.

In summary, the Rangemaster Toledo FS Hob is a remarkable addition to any kitchen. With its induction technology, multiple cooking zones, safety features, and easy-to-clean surface, it strikes the perfect balance between form and function, making it an ideal choice for those who appreciate quality and efficiency in their cooking appliances.
Top Page Image Contents