GAS INSTRUCTIONS

Remove Control Knobs & Control Panel For Leak Testing

1

2

You will need: Phillips screwdriver..

 

 

A) Take off the burner control knobs (1)..

 

 

B) Remove screw and washer from back of control panel with a Phillips screwdriver (2)..

 

 

C) Remove machine screw from lower left and right side of control panel with a Phillips

 

 

screwdriver (3)..

3

 

D) Tilt the back edge of the control panel up.. Carefully lift control panel up and away

 

 

 

from frame (4)..

 

 

E) Disconnect the igniter wires from the ignition module (5)..

 

 

F) Replace control panel when leak check is completed.. ◆

 

 

CHECK FOR GAS LEAKS

 

 

m DANGER

4

 

Do not use an open flame to check for gas leaks. Be sure

 

 

 

there are no sparks or open flames in the area while you

 

 

check for leaks. Sparks or open flames will result in a fire or

 

 

explosion, which can cause serious bodily injury or death

 

 

and damage to property.

 

5

 

 

Note: All factory-made connections have been thoroughly checked for gas leaks.The burners have been flame-tested.As a safety precaution however, you should recheck all fittings for leaks before using your Weber® gas barbecue. Shipping and handling may loosen or damage a gas fitting.

m WARNING: The gas connections of your gas grill have been factory tested. We do however recommend that you leak check all gas connections before operating your gas grill.

m WARNING: Perform these leak checks even if your barbecue was dealer or store assembled.

If your grill has a side burner make sure the side burner is turned off..

Turn on gas supply at source..

mWARNING: Do not ignite burners when leak checking.

You will need: A soap and water solution and a rag or brush to apply it..

A)Mix soap and water..

B)Turn on gas supply (1)..

C)Check for leaks by wetting the fitting with the soap and water solution and watching for bubbles.. If bubbles form, or if a bubble grows, there is a leak..

If there is a leak, turn off the gas and tighten the fitting. Turn the gas back on and

 

recheck with the soap and water solution. If leak does not stop do not use the

 

barbecue. Contact the customer service representative in your area using the

1

contact information on our web site. Log onto www.weber.com®.

D) When leak checking is complete, turn gas supply off at the source and rinse connections with water..

Note: Since some leak test solutions, including soap and water, may be slightly corrosive, all connections should be rinsed with water after checking for leaks.

mWARNING: You should check for gas leaks every time you disconnect and reconnect a gas fitting.

www.weber.com® 9

Page 8 Page 10
Page 9
Image 9
Weber 89963 manual Check for GAS Leaks, Remove Control Knobs & Control Panel For Leak Testing
Page 8 Page 10

89963 specifications

The Weber 89963 is an exceptional grill accessory designed to elevate your outdoor cooking experience. Known for its sturdy construction and innovative features, this product perfectly complements Weber's renowned line of grilling equipment. Designed with the serious griller in mind, the 89963 model is a versatile addition that enhances both functionality and convenience when preparing delicious meals.

One of the standout features of the Weber 89963 is its high-quality material. Built from durable, heat-resistant stainless steel, it promises long-lasting performance, ensuring that it can withstand the rigors of the grilling environment. This robust material not only enhances the longevity of the unit but also provides an impressive resistance to rust and corrosion, making it ideal for outdoor use year-round.

The 89963 also boasts an innovative design that maximizes cooking efficiency. Its spacious cooking surface allows for ample space to grill multiple items at once, from juicy steaks to vegetables, ensuring that you can cater to gatherings with ease. The grill grates are engineered to provide optimal heat retention and even cooking, allowing you to achieve those perfectly seared grill marks that every griller strives for.

Another notable aspect of the Weber 89963 is its integrated features that facilitate enhanced cooking control. With a built-in temperature gauge, you can monitor the heat levels of your grill, ensuring that your food is cooked to perfection every time. The easy-clean porcelain-enameled lid promotes hassle-free cleanup while retaining heat and moisture, leading to succulent grilled dishes.

In addition to its functional benefits, the Weber 89963 is designed with user-friendly technologies. Installation is straightforward, and the grill accessory is compatible with a wide range of Weber grill models, making it a versatile option for various setups. The thoughtful design includes handles that make lifting and maneuvering easier, ensuring you can manage your grilling tasks with confidence.

Whether you are a seasoned pitmaster or a weekend cooking enthusiast, the Weber 89963 offers the features and technologies needed to deliver delicious results. Its durable construction, efficient cooking capabilities, and ease of use define what makes this grill accessory a must-have for anyone serious about outdoor cooking. With the Weber 89963, every grilling experience becomes an opportunity to impress family and friends with delectable meals.
Top Page Image Contents