OPERATING THE BRUSH BAR ON / OFF SWITCH |
|
1 | 2 |
ON/OFF |
|
•Push the power On/Off switch, and then push the brush bar On/Off switch.
•The Brush Switch should be in the "On" position for normal carpet cleaning.
•Turn the Brush Switch "Off" for bare floor cleaning or other delicate surfaces.
In the upright position, the Brush bar does not work.
CAUTION
RESETTING THE OVERLOAD PROTECTOR
•The overload protector shuts off the brush motor if the brush bar becomes obstructed. To reset the overload protector, use a pen tip to press the reset switch.
USING THE VACUUM'S HANDLE (THE DUST BIN HANDLE)
When you carry the vacuum cleaner by the handle, do not push the dust bin release
CAUTION button.