Troubleshooting
Check this list of problems and possible solutions before bringing your vacuum to a service center.
PROBLEM | SOLUTION |
•Check the electrical plug. Make sure it is fully plugged in.
Vacuum won’t run. • Press the Power on/off button.
•Reset overload protector.
Suction Motor does |
| |
not start. | • Allow the vacuum to cool. | |
Thermal protector | ||
| ||
activated. |
| |
|
| |
Brush Motor does not | • Check the brush ON/OFF button. | |
• Cut hair or string off the brush. | ||
start. | ||
• Reset the overload protector. | ||
| ||
|
| |
| • Empty the dust bin. | |
Vacuum won’t pick up | • Clean the filter and confirm that the filter assembly is positioned | |
or low suction. | properly. | |
| • Check the hose connection or flow path. | |
|
| |
| • Empty the dust bin. | |
Dust escaping from | • Clean the | |
the vacuum. | • Clean or replace the exhaust filter. | |
| • Confirm that the filter assembly is positioned properly. | |
|
| |
| • Check inlets, pipe, and dust bin for obstructions. | |
Cleaner tools won’t | Remove obstruction. | |
• Empty the dust bin. | ||
• Remove and clean the filters. | ||
| ||
| • Confirm that the dust bin is locked properly. | |
|
| |
The sky blue button |
| |
won't return to | • Check the diverter. | |
position after being | • Clean the cover and inside of diverter. | |
pushed. |
|
This Vacuum cleaner is approved the following.
EMC Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC