Samsung WW90K6410QW/EU manual Operations, Control panel

Operations

Control panel

01

02 10

08

11

09

03 04 05 06 07

Operations

01 Cycle Selector	Turn the dial to select a cycle.
02 Display	The display shows current cycle information and estimated time
	remaining, or an information code when a problem occurs.
03 Temp.	Press to change the water temperature for the current cycle.
04 Rinse	Press to change the rinse count for the current cycle. You can set
	the rinse count to a max of 5, depending on the cycle.
	Press to change the spinning speed for the current cycle.
	•	Rinse Hold : The final rinse process is suspended so that
		the laundry remains in the water. To unload the laundry, run a
		drain or spin process.
	•	No Spin : The drum does not rotate after the final drain
05 Spin		process.
	•	Spin Only : To run the Spin Only cycle, press Spin for 3
		seconds. When the cycle time and spinning speed appear, press
		Spin repeatedly until a desired spinning speed is selected. Then,
		press Start/Pause to start the cycle. The spinning time depends
		on the selected cycle.
	Press to select an option from Intensive, Pre Wash, and Bubble
06 Options	Soak. Press again to deselect.
	• Availability of the options depends on the cycle.
07 Bubble Soak	Press to activate/deactivate the Bubble Soak function. This
	function helps remove a wide variety of stubborn stains.

32  English

Untitled-9 32

12/22/2016 6:44:41 PM