Code | Action | |
|
| |
| The electronic control needs to be checked. | |
| • Check if power is supplied properly. | |
| • If the information code remains, contact a customer service | |
UC | centre. | |
| ||
Low voltage detected. | ||
| ||
| • Check if the power cord is plugged in. | |
| • If the information code remains, contact a customer service | |
| centre. | |
|
| |
| High temperature heating check. | |
HC | • If the information code remains, contact a customer service | |
| centre. | |
|
| |
| The Water Level sensor is not working properly. | |
1C | • Turn the machine off, and restart the cycle. | |
• If the information code remains, contact a customer service | ||
| ||
| centre. | |
|
| |
| Check communications between main and sub PBAs. | |
AC | • Turn the machine off, and restart the cycle. | |
• If the information code remains, contact a customer service | ||
| ||
| centre. | |
|
| |
| This message appears when you open the Add Door without | |
| pressing Start/Pause. If this happens, do one of the following: |
•Press the Add Door to close properly. Then, press Start/Pause
DDC, ddC | and try again. |
•To add laundry, open the Add Door and input laundry. Close the Add Door properly. Then, press Start/Pause to resume operation.
| The MEMS sensor is not working properly. | |
8C | • Turn the machine off, and restart the cycle. | |
• If the information code remains, contact a local Samsung | ||
| ||
| service centre. | |
|
| |
| Check communications between the main and the inverter PBAs. | |
| • Depending on the state, the machine may automatically | |
AC6 | returns to normal operation. | |
• Turn the machine off, and restart the cycle. | ||
| ||
| • If the information code remains, contact a local Samsung | |
| service centre. |
Troubleshooting
English 55
12/22/2016 6:44:47 PM