Nady Systems GTH-100 manual

F R O N T C O N T R O L S A N D C O N N E C T I O N S

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

(12)

(13)

(3) (2)

(1)

1. POWER SWITCH

This switch turns the main power on and off. Flipping the toggle switch up to the ON+ position will turn on the amp “in phase” with the main AC line voltage. Flipping the switch down to the ON- position will reverse the polarity. In some cases, AC hum (caused by ground loops) can be reduced by reversing the polarity. Select the On position which has the least amount of AC hum.

2.POWER INDICATOR LIGHT Lights when the unit is powered on.

3.HI / STBY / LO SWITCH

Flipping this toggle switch to the STBY position will respectively disable the audio to the amplifier and the outputs and put the amp in standby mode. This allows for proper warm-up of the tubes before applying signal to them, and allows the amp to stay warm when not in immediate use. To extend the life of the tubes, always turn the Main Power Switch on first, for 1-2 minutes, before flipping the Standby Switch to LO or HI. Set the switch to LO, which will enable audio with a maximum of 30W RMS output power, if the highest volume is not necessary, or, if you want to achieve more distortion at the output tubes. Flipping the switch to HI will enable audio to the amplifier with a maximum 100W RMS output.

4. HIGH INPUT JACK

Input for instrument outputs like passive guitar outputs, keyboard, mics for harmonicas, and other effects devices.

5. LOW INPUT JACK

The Low Input Jack has a pad with approx 9dB with lower gain than the High Input Jack. This should be used with higher level electronic devices or to achieve more range from the gain controls before distortion.

6. DISTORTION SELECTOR

This three-way switch selects the input sensitivity and amount of overdrive distortion. Position 1 offers the cleanest signal with least amount of distortion. Position 3 has the maximum amount of distortion.

Note: The VOLUME and MASTER controls also affect the final signal level and the amount of distortion.

•For cleanest operation (least distortion) adjust the VOLUME to a very low setting, the MASTER to maximum, and the DISTORTION to Position 1.

•For medium distortion (or crunch) adjust the VOLUME to past the mid position, the MASTER to mid, and the DISTORTION to Position 2.

•For maximum distortion adjust the VOLUME to maximum, the MASTER to a very low setting, and the DISTORTION to Position 3.

7.VOLUME CONTROL

This adjusts the level of the input signal to the amp. Increasing this level will create distortion dependent on the DISTORTION SELECTOR setting.

8.MASTER VOLUME CONTROL Adjusts overall loudness of the amp.

9.TREBLE CONTROL

Adjusts the level of treble/Hi frequencies.

10. MID CONTROL

Adjusts the level of mid-range frequencies.

11. BASS CONTROL

Adjusts the level of bass frequencies.

12. PRESENCE CONTROL

Adjusts the high overtones, texture, and feel of the amp.

13. REVERB CONTROL

Adjusts the level of reverb mixed with the dry signal.

GTH-100 specifications

The Nady Systems GTH-100 is a state-of-the-art wireless guitar system that has gained popularity among musicians for its impressive performance and reliability. Designed specifically for guitarists, the GTH-100 combines cutting-edge technology with user-friendly features to deliver exceptional sound quality and versatility on stage or in the studio.

One of the main features of the GTH-100 is its UHF (Ultra High Frequency) transmission system, which allows for a high-quality audio signal with minimal interference. Operating in the 900 MHz frequency range, the GTH-100 provides a generous range of up to 100 feet, enabling players to move freely while performing without the restrictions of a cable. This technology ensures clear, consistent sound reproduction, even in crowded environments where other wireless systems might struggle.

Another key characteristic of the GTH-100 is its ease of use. The system includes a plug-and-play design, making setup and tear-down quick and straightforward. Musicians can simply plug the transmitter into their guitar and connect the receiver to their amplifier or pedalboard, and they are ready to rock. Additionally, the GTH-100 features an auto-scan function that automatically selects the best available channel, minimizing setup time while maximizing reliability during performances.

The transmitter's design is both compact and lightweight, providing comfort and convenience for guitarists. Powered by a rechargeable lithium-ion battery, the GTH-100 offers an impressive battery life of up to 8 hours, ensuring that musicians can perform lengthy sets without worrying about running out of power. The built-in battery indicator allows players to monitor their power levels easily, providing peace of mind.

In terms of sound quality, the GTH-100 boasts a wide frequency response that captures the nuances of a guitar's tone, from crisp highs to deep lows. The system also features advanced audio compression technologies that preserve dynamics and clarity under varying conditions, ensuring that musicians can deliver their sound accurately without sacrificing quality.

Overall, the Nady Systems GTH-100 is an innovative wireless solution for guitarists looking to enhance their performance experience. With its reliable UHF transmission, user-friendly design, extended battery life, and superb audio quality, the GTH-100 truly stands out in the competitive market of wireless guitar systems, making it an excellent choice for performers of all levels.