Operating Instructions,Tips
CONTROL PANEL
During DRYcycle, displayed remaining time may be increased or decreased. Such a condition is not a system failure, but a DRYfunction optimization process.
Load less than 8lb to get the best drying result. (Max. DRYtime is 3 hours.)
1.SIGNAL button
Initial mode is set to OFF at the factory, and no completion buzzer makes sound.
Push the SIGNAL button to turn the SIGNAL lamp ON and make the completion buzzer sound.
2.TEMP button
Initial mode is set to OFF at the factory. Push TEMP button to select LOW temperrature and turn lamp ON.
3. TIME button
TIME button displays 1:25 minutes at its initial mode. You can decrease each 10 minutes by pushing the button each one time.
(1:251:151:05.............. 25151:25)
4.DELAY START button
DELAY START button is to be selected in order of 1 hour 2 hours 3 hours ...24 hours Cancel.
5.WRINKLE-RELEASE button
Push
6.SELECTION OF CYCLE
Turn Dial to indicate cycles in the following order.
Cotton+Dry Cotton+Cupboard Dry Cotton+Iron Dry Cotton+Damp Dry Freshen up Synthetic+Extra Dry Synthetic+Intensive Dry Synthetic+Dry Synthetic+Cupboard Dry Synthetic+Iron Dry Synthetic+Damp Dry Freshen up Cotton+Extra Dry Cotton+Intensive Dry Cotton+Dry
7.FILTER lamp
Turn the system ON to let FILTER lamp flicker 3 times. When a drying cycle is finished, FILTER lamp turns ON to display cleaning instruction of filter.
8.CHILD LOCK lamp
When the system turns ON, push
To cancel the mode, push DELAY START button and
9.START/PAUSE button
Press the button to start and pause the system.
10.POWER button
Press the button once to turn the system ON, press it once more to turn the system OFF. When the system turns ON for longer than 10 minutes without pressing any buttons,it automatically turns OFF.