Samsung BD-P1600A/SAM Turn on the Blu-ray Disc Player, TV and Amplifier, Speakers and your ears

connections

Connecting to an Audio System

(Dolby Digital, DTS Amplifier) - BETTER QUALITY

1.Using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the Blu-ray Disc Player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier.

2.Using the video signal cable(s), connect the HDMI, COMPONENT or VIDEO OUT terminals on the rear of the Blu-ray Disc Player to the HDMI, COMPONENT or VIDEO IN terminals of your TV. (see pages 22~26)

3.Turn on the Blu-ray Disc Player, TV and Amplifier.

4.Press the input select button of the Amplifier to select the external input in order to hear sound from the Blu-ray Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input.

Optical cable (not included)

M	 Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
	speakers and your ears.
	 Please set the audio in the menu screen according to the Amplifier. (See pages 38~40)
	 The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your
	Amplifier.
	 When using this connection, discs with LPCM audio soundtracks will only be heard over the front two
	channels.

28_ connections