Samsung DVD-1080P9/MEA manual Setting Up the Display Options, ❶ TV Aspect, ❷ Screen Messages

changing setup menu

❷MPEG-2 Digital Out

-PCM : Converts to PCM(2CH) audio.

-Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Output.

❸Dynamic Compression

-On : To select dynamic compression.

-Off : To select the standard range. ❹ PCM Down Sampling

-On : Select this when the Amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.

-Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes.

Note :

-There is no analog audio output when you play a DTS sound disc.

-Even when PCM Down sampling is Off

•Some discs will only output down sampled audio through the digital outputs.

•To make the Setup menu disappear, press the MENU button

➎Power On Music

This menu is used to activate or deactivate the opening sound when you turn on the DVD player.

-On : To turn On Start up music.

-Off : To turn Off Start up music.

HDMI

- If your TV is not compatible with compressed multi- channel formats (Dolby Digital, DTS, MPEG), you should set Digital Audio to PCM.

-If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down sam- pling to On.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Setting Up the Display Options

Language Setup		®
Audio Setup		®
Display Setup		®
Parental Setup :		®
DivX(R) Registration		®
Anynet+(HDMI-CEC) : On
Enter	Return	Menu

❶TV Aspect

Depending on a type of television you have, you may want to adjust the screen setting (aspect ratio).

-4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

-4:3 Pan&Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

-16:9 Wide : You can view the full 16:9 picture on your wide screen TV.

DISPLAY SETUP

TV Aspect	√ 4:3 Letter Box
Screen Messa
	4:3 Pan&Scan
TV System
	16:9 Wide
Video Output

HDMI		®
Picture Quality		®
Enter	Return	Menu

❷Screen Messages

Use to turn on-screen messages On or Off.

❸TV System

-NTSC : In case of using NTSC disc

•If your TV system only has PAL-Video input, you must choose “PAL”. When you choose “PAL”, Interlace out- put format is PAL 60 Hz output.

•If your TV system only has NTSC, input you must choose “NTSC ”.

•If you set up the NTSC TV, HDMI output frame rate is 60 Hz.

- PAL : In case of using PAL disc

•If your TV system only has NTSC-Video input, you must choose “NTSC”.

•If your TV system only has PAL input, you must choose “PAL ”.

•If you set up the PAL TV, HDMI output frame rate is 50 Hz. - Auto

Display options enable you to set various video functions of the player.

1.With the unit in Stop mode, press the MENU button.

2.Press the π/† buttons to select Setup, then press the ® or ENTER button.

3.Press the π/† buttons to select Display Setup, then press the ® or ENTER button.

4.Press the π/† buttons to select the desired item, then press the ® or ENTER button.

DISPLAY SETUP

TV Aspect		: 4:3 L-Box
Screen Messages : On
TV System		NTSC
Video Output		PAL
HDMI		√ Auto
Picture Quality		®
Enter	Return	Menu

28_ changing setup menu