Samsung DVD-1080P9/SAM manual Folder Selection, MP3/WMA/CD Audio Playback, MPEG4 Playback

Folder Selection

The folder can be selected both in Stop or Play mode.

-To select the Parent Folder

Press the RETURN button to go to parent folder, or press the π/† buttons to select “..” and press ENTER to go to the parent folder.

-To select the Peer Folder

Press the π/† buttons to select the desired folder, then press ENTER.

-To select the Sub-Folder

Press the π/† buttons to select the desired folder, then press ENTER.

Root

WMA

JPEG

1st

Sub-Folders

2nd

SONG FILE 1

Peer Folders

SONG FILE 2

SONG FILE 3

MPEG4 FILES

MP3/WMA/CD Audio

Playback

1.Open the disc tray. Place the disc on the tray. Close the tray.

-Only one kind of file is played back when a disc or a folder contains both MP3 and WMA files.

2.Press the π/† or √/® buttons to select a song file. Press ENTER to begin playback of the song file.

Repeat/Random playback

Press the REPEAT button to change the playback mode. There are four modes, such as Off, Track, Folder and Random.

-Off: Normal Playback

-Track: Repeats the current song file.

-Folder: Repeats the song files which have the same extension in the current folder.

-Random: Song files which have the same extension will be played in random order.

To resume normal play, press the CANCEL button.

CD-R MP3/WMA file

When you record MP3 or WMA files on CD-R, please refer to the following.

-Your MP3 or WMA files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with Apple's Mac.

This format is the most widely used.

-When naming your MP3 or WMA files, do not exceed 8 characters, and enter “.mp3, .wma” as the file extension. General name format : Title.mp3. or Title.wma. When composing your title, make sure that you use 8 characters or less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,=,+).

-Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.

Sound quality with MP3 files basically depends on the rate of compression/decompression you choose. Getting CD audio sound requires an analog/digital sampling rate, that is conversion to MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps or more, only rarely give better sound quality. Conversely, files with decompression rates below 128 Kbps will not be played properly.

-Use a decompression transfer rate of at least 64Kbps when recording WMA files.

Sound quality with WMA files basically depends on the rate of compression/decompression you choose.

Getting CD audio sound requires an analog/digital sampling rate, that is conversion to WMA format, of at least 64Kbps and up to 192Kbps. Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played properly. Sampling rate that can be supported for WMA files is > 30Khz.

-Do not try recording copyright protected MP3 files. Certain "secured" files are encrypted and code protected to prevent illegal copying. These files are of the following

types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM (registered trade mark of The SDMI Foundation). You cannot copy such files.

-Important:

The above recommendations cannot be taken as a guarantee that the DVD player will play MP3 recordings, or as an assurance of sound quality. You should note that cer tain technologies and methods for MP3 file recording on CD- Rs prevent optimal playback of these files on your DVD player (degraded sound quality and in some cases, inability of the player to read the files).

-This unit can play a maximum of 500 files and 500 folders per disc.

MPEG4 Playback

MPEG4 Play Function

AVI files are used to contain the audio and video data. Only AVI format files with the “.avi” extensions can be played.

1.Open the disc tray. Place the disc on the tray. Close the tray.

2.Press the π/† or √/® buttons to select an avi file (DivX/XviD) and then press ENTER button.

● ADVANCED FUNCTIONS