Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using an optical cable (not included), connect the DIGI- TAL AUDIO OUT (OPTICAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.
If using a coaxial cable (not included), connect the DIGI- TAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) termi- nal of the Amplifier.
English
2
Using the video signal cable(s), connect the VIDEO, S- VIDEO, COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO,
3
Turn on the DVD player, TV, and Amplifier.
or | Coaxial Cable | |
(not included) | ||
|
Optical Cable (not included)
Dolby digital or
DTS amp
4
Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
Note
-When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio Setup menu. If it is set to Off, sound doesn't come out or there will be a big noise.
-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.
-Please set the audio in the menu screen according to the Amplifier. (See pages 27)
-The position of terminals can vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.
-Please remove the dust cover before using the optical cable (not included) and put the cover on the cable again when it's not used.
15