Settings
4.Enter your wireless network or wireless router's name.
•Enter numbers directly using the number buttons on your remote control.
•Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.
•To display capital letters (or redisplay lower case letters if capital letters are displayed), select 
, and then press the E button.
•To display symbols and punctuation, select 123#&, and then press the E button. To redisplay letters, select 123#&, and then press the E button.
When finished, select Done, and then press the
Ebutton.
5.On the Security method screen that appears, use the ▲▼ buttons to select the network's Security method, and then press the E button. On the next screen, enter your network's security code or pass phrase.
•Enter numbers directly using the number buttons on your remote control.
•Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.
When finished, select Done, and then press the E button. The product searches for the network.
6.The Network connection fail screen appears. Use ◄► buttons to select IP Settings, and then press the E button.
7.Select the IP setting field, and then set it to Enter manually.
8.Select a network parameter to enter (IP Address, for example), and then press E button. Use the number keypad on your remote control to enter the numbers for the parameter. You can also enter numbers using the ▲▼ buttons. Use the ◄► buttons on the remote control to move from entry field to entry field within a parameter. When done with one value, press the E button.
9.Press the ▲ or ▼ button to move to another parameter, and then enter the numbers for that parameter following the instructions in Step 8.
10.Repeat Steps 8 and 9 until you have filled in all parameters.
✎You can get the Network parameter values from your Internet provider.
11.When finished, select Return ('), and then press the E button. The Security Key screen appears.
12.On the Security Key screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.
13.When finished, select Done at the right of the screen, and then press the E button. The product verifies the network connection and then connects to the network.
14.After the home cinema verifies the network, select OK, and then press the E button.
✎You can also begin the Manual Network setup by going to Settings > Network > Network Status.
WPS(PBC)
One of the easiest ways to set up the wireless network connection is using the WPS(PBC) function. If your wireless router has a WPS(PBC) button, follow these steps:
Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 20)
1.In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks.
2.Scroll the list down, select WPS(PBC), and then press the E button.
3.Press the WPS(PBC) button on your router within two minutes. Your product automatically acquires all the network settings values it needs and connects to your network after the network connection is verified.
4.When it is done, highlight OK, and then press the E button.
✎For a WPS connection, set your wireless router’s security encryption to AES. WEP security encryption does not support a WPS connection.