Appendix
| Symptom |
| Check/Remedy |
Dolby Digital 5.1 CH | • | Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround | |
Surround Sound is not |
| Sound is produced only if the disc is recorded with 5.1 channel sound. | |
produced. | • Is the audio language correctly set to Dolby Digital | ||
|
|
| display? |
The remote control does | • | Are you operating the remote within its operational range and within the | |
not work. | • | properangle relative to the sensor? | |
|
| Are the batteries drained? | |
|
| • | Have you selected the mode (TV/BD) functions of the remote control (TV or BD) |
|
|
| correctly? |
• | The disc is rotating but | • | Is the TV power on? |
• | there is no picture. | • | Are the video cables connected properly? |
Picture quality is poor | • | Is the disc dirty or damaged? | |
| and the picture is | • | A poorly manufactured disc may not be playable. |
| shaking. |
|
|
Audio language and | • The Audio Language and subtitle functions will not work if the disc does not | ||
subtitles do not work. |
| contain multiple language sound tracks or subtitles. | |
The menu screen does | • | Are you using a disc that does not contain menus? | |
not appear even when you |
|
| |
select the menu function. |
|
| |
The aspect ratio cannot be | • | You can play 16:9 | |
changed. |
| ||
|
|
| the |
• | The product is not | • | Press and hold the remote control's 5 button for 5 seconds in STANDBY mode. |
| working. |
| This will reset the unit. |
| (Example: The power |
| - Using the RESET function will erase all stored settings. |
| goes off or you hear a |
| Do not use this function unless necessary. |
• | strange noise.) |
|
|
The Product is not |
|
| |
| working normally. |
|
|
You have forgotten the | • | With no disc in the product, press and hold the product's 5 button for longer | |
rating level password. |
| than 5 seconds. INIT appears on the display and all settings will return to their | |
|
|
| default values. |
|
|
| - Using the RESET function will erase all stored settings. |
|
|
| Do not use this function unless necessary. |
Can't receive radio | • | Is the antenna connected properly? | |
broadcasts. | • | If the antenna's input signal is weak, install an external FM antenna in an area with | |
|
|
| good reception. |
There is no sound when you try to listen to TV audio through the home cinema speakers.
•If you press the ^ button while listening to TV audio using the D. IN or AUX functions, the