Samsung HT-E6750W/SQ Initial Settings Procedure, Initial settings, You selected, Language screen

Settings

The Initial Settings Procedure

• The Home menu will not appear if you do not configure

the initial settings.

• The OSD (On Screen Display) may change in this

product after you upgrade the software version.

• The access steps may differ depending on the menu

you selected.

1 . Turn on your TV after connecting the product,

and then turn on the product. When you turn

on the product for the first time, the product

automatically displays the Initial Settings

NOTE

\The product starts the wireless network connection procedure by default. If you want to set up a wired connection, select Skip, and then go to "Configuring Your Network Connection" on page 32 after you have completed the Initial Settings Procedure.

\If you skip wireless network setup here, go to "Wireless Network" on page 33 to set up the product's wireless network connection later.

5 . The product searches for and then displays all available wireless router network connections.

04 Settings

Language screen.

2 . Use the ▲▼◄► buttons on the remote

to select the desired language, and then press the E button twice. The Start screen appears.

3 . Press the E button to start setup. The Network Settings screen appears.

Initial Settings > Network Settings (2/5)

Select your wireless router from the list.

KIMING_VTOWER

TIAS

si-ap surlwang5

Add Network

1 / 4

Refresh

WPS(PBC)

Previous

Next

Skip

Initial Settings > Network Settings (1/5)

The next step is to set up a wireless network using an internal LAN Adapter.

Previous

Next

Skip

If you want to connect to your wired network, plug in a network cable.

4 . Press the E button to set up the product's wired network connecton or select Skip, and then press the E button to skip network setup. If you selected Skip, go to Step 12.

6 . Use the ▲▼ buttons to select a router, and then press the E button. The Next button is highlighted.

7 . Press the E button to continue. The Security Key screen appears.

NOTE

\If you have a WPS(PBC) compatible router, select WPS(PBC) instead, press the Ebutton, and then follow the directions on the screen. When done, go to Step 10.

English 23