Samsung HT-E6750W/SQ manual By Disc, By downloaded, Standby Mode upgrade

Settings

By Disc

1 . Visit www.samsung.com.

2 . Click SUPPORT on the top right of the page.

3 . Enter the product's model number into the search field, and then click Find Product.

4 . Click Get downloads in the Center of the page below the Downloads header.

5 . Click Firmware in the Center of the page.

6 . Click the ZIP icon in the File column on the right side of the page.

7 . Click OK in the pop-up that appears to download and save the firmware file to your PC.

8 . Unzip the zip archive to your computer. You should have a single .RUF file.

9 . Write the RUF file onto a disc. We recommend a CD-R or DVD-R.

10 . Finalize the disc before you remove it from your computer.

11 . Insert the disc into the product.

12 . In the product’s menu, go to Settings > Support > Software Update.

13 . Select By Disc. NOTE

\When the system upgrade is done, check the software details in the Software Update menu.

\Do not turn off the product during the Software Update. It may cause the product malfunction.

By downloaded

The By downloaded option lets you upgrade using a file the product downloaded earlier but you decided not to install immediately.

1 . If upgrade software has been downloaded, you will see the software version number to the right of By downloaded.

2 . Select By downloaded, and then press the

E button.

3 . The product displays a message asking if you want to upgrade. Select Yes. The product begins the upgrade.

4 . When the update is complete, the product turns off automatically, and then turns on.

NOTE

\When the system upgrade is done, check the software details in the Software Update menu.

\Do not turn off the product during the software upgrade. It may cause the product to malfunction.

Standby Mode upgrade

You can set the Standby Mode upgrade function so that the product downloads new upgrade software when it is in Standby mode.

In Standby mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it.

1 . Press the ▲▼ buttons to select Standby Mode upgrade, and then press the E button.

2 . Select On or Off.

If you select On, the product will automatically download new upgrade software when it

is in Standby mode with the power off. If it downloads new upgrade software, the product will ask you if you want to install it when you turn the product on.

NOTE

\To use Standby Mode upgrade function, your product must be connected to the Internet.

\If this function does not appear, you can upgrade to the latest software and use it.

38 English