Samsung HT-ES420K/SQ manual Connecting The Speakers, Assembling the Front Speaker

Assembling the Front Speaker

You can install the product in one of the following two ways:

Choose a desired one according to the installation area and your decoration plan.

Installing on the Partition 1

The front speakers can be combined by a partition.

1.	Connect the left/right speakers to the Partition.	Partition
2.	Insert screws into the hole on the rear of each speakers, and	2

then use screwdriver to tighten screws clockwise.

3.This is the appearance after the speaker is installed.

02 Connections

Installing on the Table Stand

1.Connect the Speaker to the Stand Base.

2.Insert a screw into the hole on the rear of the speaker, and then use screwdriver to tighten a screw clockwise.

3.This is the appearance after the speaker is installed. Follow this steps to install other speaker.

3

12

Speaker

Stand

Base

3

Connecting The Speakers

1. Press down the terminal tab on the back of the speaker.

2.Insert the black wire into the black terminal (–) and the red wire into the red

terminal (+), and then release the tab.					Black	Red
3. Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.
					Front Speaker (L)
Front Speaker (R)
		SPEAKERS OUT	VIDEO
		AUX IN 2	OUT 
	FA NET			FM ANT HDMI OUT
	(Only For Service)
			OPTICAL
			DIGITAL
		SUBWOOFER	AUDIO IN

Subwoofer

English 17