Samsung HT-F6550W/SQ Lets you set the product to output, Lets you improve picture quality, Sound

Settings

	Lets you set the product to output
HDMI Deep	video from the HDMI OUT jack with
	Deep Colour. Deep Colour provides
Colour	more accurate colour reproduction
	with greater colour depth.
Progressive	Lets you improve picture quality
Mode	when viewing DVDs.
	Audio
	Lets you configure the settings of
	the speakers you have connected
	to obtain the best possible surround
	sound.
	 Normal Mode: Select if you
	have set up your speakers in the
	recommended speaker layout with
Simple	the surround speakers next to or
	behind the listening positions.
Speaker	 Simple Mode: Select if you have
Setup	put your surround speakers in front
	of the listening position. Downmixes
	the front sound to the surround
	sound speakers.
	NOTES
	DPLII, SFE, Virtual 7.1 will not
	operate when the simple mode is
	on.
	Lets you adjust the following
	speaker settings and turn the test
	tone on and off so you can test the
	speakers.
	 Level: Lets you adjust the relative
	loudness of each speaker from 6db
	to -6db. For example, if you like
	deep bass, you can increase the
Speaker	loudness of the subwoofer by 6db.
	
Settings	Distance: Lets you adjust the
	relative distance of each speaker
	from the listening position up to 9
	meters. The farther the distance,
	the louder the speaker will be.
	 Test Tone: Lets you run the Test
	Tone function so you can test your
	adjustments. Setting Test Tone to
	On turns the Test Tone on. Setting it
	to Off turns it off.
Equaliser	Lets you configure the Equaliser
	settings manually.

	Lets you set the product so that
Smart Volume	the volume remains stable when a
	scene change occurs or when you
	change the channel.
Speaker	Lets you select which speakers you
	want active, either the TV's speakers
Selection	or the home cinema's speakers.
	Lets you direct the sound from the
	TV to the Home Cinema speakers.
	Requires a HDMI connection and
	an Audio Return Channel (ARC)
	compatible TV.
	•	If Audio Return Channel is set to
Audio Return		on and you are using an HDMI
		Cable to connect the product to
Channel		the TV, digital optical input will not
	•	work.
		If Audio Return Channel is set to
		auto and you are using an HDMI
		Cable to connect the product to
		the TV, ARC or digital optical input
		is selected automatically.
	Lets you set the Digital Output to
	match the capabilities of the AV
Digital Output	receiver you’ve connected to the
	product. For more details, please
	refer to the digital output selection
	table. (See page 54)
	Lets you apply dynamic range
	control to Dolby Digital, Dolby Digital
	Plus, and Dolby TrueHD audio.
	 Auto: Automatically controls the
		dynamic range of Dolby TrueHD
		audio, based on information in the
Dynamic		Dolby TrueHD soundtrack. Also
		turns dynamic range control off for
Range		Dolby Digital and Dolby Digital Plus.
Control	 Off: Leaves the dynamic range
		uncompressed, letting you hear the
		original sound.
	 On: Turns dynamic range control on
		for all three Dolby formats. Quieter
		sounds are made louder and the
		volume of loud sounds is reduced.
	Lets you select the multi-channel
Downmixing	downmix method that is compatible
	with your stereo system. You
Mode	can choose to have the product
	downmix to normal stereo or in
	surround compatible stereo.

22 English