Samsung WAM350/SQ manual AA Adding a HUB, AA Relocating the M3

AAAdding a HUB

An M3 and a HUB may not pair successfully if the M3 and HUB are too far apart or are on different floors.

In such cases, you can link two HUBs together by setting the second HUB to Repeater mode. The additional HUB amplifies the signal and lets you pair the M3 to the closest HUB.

1Set the HUB that is connected to the wireless router to Pairing mode by pressing its SPK ADD button for 1 second.

2	Plug in the new HUB you are using as an extender,
	and then press its SPK ADD button for 10 seconds.
3	The newly added HUB's LED indicators turn off and
	on, and it switches to Repeater mode.		M3
4	Once the connection between the two HUBs has been
	established, the added HUB's (	) indicator stops	Used as a
	blinking.
			extender

NOTES
99If your smart device is not connected to the wireless router
with a Wi-Fi connection, the M3 will not appear on the	HUB
Samsung Multiroom app.
99Place the HUB that is in Repeater mode in an appropriate
location between the M3 and the HUB that is connected to the wireless router.
99You can set only one HUB to Repeater mode.

AARelocating the M3

When relocating your M3, refer to the below table.

Wireless router	If you want to connect your M3 to the	If you want to connect your M3 to a
HUB	current wireless router.	different wireless router.
		Turn off the M3, relocate it, then establish
Without a HUB		the new connection as described in the
	Turn off the M3, relocate it and then turn	installation instructions on pages 13
		through 27. Press here
	it on.
		Connect a LAN cable between the HUB
With a HUB		and the new wireless router, turn on the
		HUB, and then turn on the M3.

4444

39