|
|
|
Symptom | Check | Remedy |
HUB doesn't work properly | •• Is the HUB plugged in? | •• Plug in the HUB. |
| •• Is the LAN cable connected to | •• Connect the LAN cable to the |
| the wireless router and the HUB | ETHERNET SWITCH on the back |
| properly? | of the HUB and to your wireless |
| •• When the Hub is plugged in, do | router. |
| the HUB's front indicators show | •• Reset the HUB (see page 65). |
| it's operating properly? | Press here |
|
| •• If you experience troubles with |
|
| connecting the HUB and M3, try |
|
| relocating the M3 so that the M3 |
|
| is closer to the wireless router or |
|
| HUB. |
M3 doesn't work properly | •• Is the M3 plugged in? | •• Plug in the M3. |
| •• Does the M3's front LED indicator | •• Check whether the |
| remain red 5 minutes after turning | you're using has been certified for |
| on? | |
|
| •• Unplug the M3, plug it back in, |
|
| and then reconnect it to the router. |
|
| •• Reset the M3 (see page 65). |
|
| Press here |
|
| •• If used with a HUB |
|
| |
|
| the HUB are connected to the |
|
| same |
|
| |
|
| LED's show that it is working |
|
| correctly. (See page 14, item 3.) |
|
| Press here |
|
| |
|
| HUB (see page 65). Press here |
|
| |
|
| Then, unplug and plug in the |
|
| M3. |
|
| |
|
| connecting the HUB and M3, |
|
| try relocating the M3 so that |
|
| the M3 is closer to the wireless |
|
| router or HUB. |
4444
68