First Fire, Shutter Adjustment | Quadra-Fire DV-40 specs

FIRST FIRE

NOTE: Never operate this stove with the door open.

Before first firing the stove, read the owner’s manual to familiarize yourself with the stove’s features, controls, and cautions for operation.

Remove all labels from glass before operating this stove for the first time.

Plug power cord into a properly installed outlet for blower operation.

During your first fire in the stove, you may notice an odor and steam coming from the stove. This is normal, it is the high temperature paint finishing the curing process. Open doors and windows in your home or structure for ventilation.

1.Follow the procedure under lighting instructions on page 39 of this manual (also located on the back of the stove).

2.After a flame has been established for 2 minutes, turn off the burner switch located at the top right of appliance. Turn this switch on and off while watching the flame area of stove to verify correct lighting through the nugget bed. If ignition is noisy or is delayed momentarily, the nuggets in that area may need to be rearranged.

3.Allow flame to burn for at least 20 minutes or until orange halo in the flame disapears.

It is recommended that the stove be cycled by turning stove on for twenty minutes, and then turned off to cool for five minutes. Then turn the stove back on and burn until the steam and/or odor are no longer present.

If odor persists, turn the gas supply to the stove off and call your local dealer or authorized service agent.

The blower system has an on/off thermally operated snap disc that will turn the blower on automatically when the proper temperature is reached and turns the blower off when the temperature cools. You may also turn the blower on or off manually and adjust the volume. It will still be necessary for the snap disc to be up to temp. The blower controls are located on a box at the right rear top of stove.

SHUTTER ADJUSTMENT

1.Remove left side panel prior to lighting stove.

2.Light stove and let unit burn for approximately 20 minutes to allow logs to cure. While logs are curing you may notice a bright orange flame, this is normal. When this flame turns to yellow or disappears, the shutter adjustment can take place.

3.The shutter is pre-set at the factory so shutter adjustment may not be necessary. If flame height adjustment is required, turn the adjustment screw clockwise to close shutter and obtain a yellow flame. For a blue flame with more glow, turn the adjustment screw counter-clockwise to open the shutter.

4.Wait five minutes to allow for flame to settle. If the flame is not satisfactory, repeat the procedure in step #3.

5.When the desired flame is acquired, replace the side panel.

CAUTION: DO NOT CLOSE THE SHUTTER TO THE POINT THAT THE FLAMES ARE TALL AND STRINGY. THIS COULD RESULT IN THE FORMATION OF SOOT BOTH INSIDE THE FIREBOX AND ON THE OUTSIDE OF YOUR HOME.

Page 38

DV-40 specifications

The Quadra-Fire DV-40 is a high-efficiency direct vent gas fireplace known for its advanced technology, aesthetic appeal, and superior heating capabilities. This versatile unit is designed to provide warmth and ambiance, making it an excellent addition to any home.

One of the standout features of the DV-40 is its direct vent system. This allows the fireplace to draw air from outside for combustion, ensuring that indoor air quality remains unaffected. This feature also makes the DV-40 a more efficient heating option, as it doesn’t deplete the oxygen levels inside the home. The balanced flue design means that the exhaust gases are vented outside while taking in fresh air, promoting a clean-burning operation.

With a BTU output ranging from 20,000 to 35,000, the DV-40 can effectively heat various spaces, making it suitable for different room sizes. Its ability to maintain consistent warmth adds to the comfort of any living environment. This unit also boasts an impressive thermal efficiency rating of up to 83 percent, translating to lower energy costs and reduced environmental impact.

The DV-40 features an aesthetically pleasing flame that can be customized according to the homeowner's preference. It offers a range of decorative options including ceramic logs, glass media, and stone, allowing users to create a unique and inviting focal point in their living room. The fireplace can be controlled via a convenient remote control that allows users to adjust heat settings and ignite the flames effortlessly.

From a safety perspective, the DV-40 incorporates advanced features such as a glass front that remains cool to the touch, ensuring peace of mind for families with children and pets. The unit is also equipped with a built-in safety shutoff system that triggers in the event of an overheating scenario.

In addition to its impressive performance and safety features, the Quadra-Fire DV-40 is designed for durability and ease of maintenance. Its robust construction ensures longevity while requiring minimal upkeep. The fireplace also adheres to various industry standards, providing assurance to consumers regarding its quality and safety.

In conclusion, the Quadra-Fire DV-40 combines modern technology, efficiency, and style. With its direct vent system, customizable aesthetic options, and superior heating capabilities, it stands out as an exceptional choice for homeowners looking to enhance their indoor spaces. Whether for cozy family gatherings or quiet evenings at home, the DV-40 is designed to deliver both function and elegance.