Samsung WW90M761NOA/KJ manual Load sensor

Options

Option	Description
	• You can turn on or off the sound from the washing machine.
Sound On/Off	When this function is set to Off, the AddWash alarm, the
	melody of cycle completion, and the power-off beep will not
	sound. However, the other sounds stay active.
Pre Wash	• This will add a preliminary washing cycle before the main
	wash cycle.
Intensive	• For badly soiled laundry. The operation time for each cycle is
	longer than normal.

Delay End

You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 1(60minutes) to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish.

1.Select a cycle. Then change the cycle settings if necessary.

2.Press Delay End (or the +/- button) repeatedly until a desired end time is set.

3.Press and hold Start/Pause (Hold to Start). The Delay End indicator blinks and the washing machine tumbles the drum to sense the weight of the load if load sensing is preset for the selected cycle. When complete, it displays your set time with the timer running.

4.To cancel the Delay End, restart the washing machine by pressing Power.

Real-life case

If you are going out at 5pm want to make sure the 2 hour wash cycle is completed by this time, select the Delay End option. Simply select the 3 hour setting and press Start/Pause (Hold to Start) at 2:00 pm. The washing machine will then start operating at 3:00 pm and will end at 5:00 pm. Please see below for the diagram which explains the timings of this example.

2:00 pm	3:00 pm	5:00 pm
Set the Delay End to 3 hours	Start	End

Load sensor

The load sensor icon lights up when you select a cycle that supports load sensing. Some cycles may not support loading sensing. Once you start the cycle, the icon blinks or stays solid during the load sensing process, and turns off when the process is complete.

Operations

English  37

WW90M761NOA_DC68-03889M_EN.indd 37

2018/4/2 16:55:51