Samsung RSG5FUPS1/SML Setting up your side-by-side refrigerator, Using the ICE Maker Optional

setting up your side-by-side refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on the purchase of your Samsung Side-By-Side Refrigerator. We hope you will enjoy the many state-of-the-art features and effi ciencies that this new appliance has to offer.

Selecting the best location for the refrigerator

•Select a location with easy access to the water supply.

•Select a location without direct exposure to sunlight.

•Select a location with level (or nearly level) flooring.

•Select a location with enough space for the refrigerator doors to open easily.

•Allow sufficient space to the right, left, back and

top for air circulation.

-If your refrigerator is not level, cooling efficiency and durability can be declined.

-Refer to drawing and dimensions below for overall space required for use.

•Please ensure that appliance can be moved freely in the event of maintenance & service.

When moving your refrigerator

To prevent fl oor damage be sure the front levelling legs are in the up position (above the fl oor). Refer to ‘Levelling the refrigerator’ in the manual(at page 10).

To protect the fi nish of the fl ooring, place the protection sheet such as packing carton under the refrigerator.

Leg

Screw Driver

When installing, servicing or cleaning behind CAUTION the refrigerator, be sure to pull the unit straight

out and push back in straight after fi nishing.

USING THE ICE MAKER (OPTIONAL)

at least 6mm

06_ setting up

at least 6mm

To Remove the Ice Bucket

- Hold the handle as shown in figure1.

- Slightly pull up the bottom part.

- Take out the ice bucket slowly.

Figure1

DA99-01745A-28.indd 06 14. 10. 10. ￿￿ 10:57