Samsung RSG5FUTS1/SML, RSG5FUPS1/SML, RSG5FURS1/SML manual Removing the freezer door

2.Insert the 2 clips in the install pack and check that each clip holds the line firmly.

clip A (1/4”) (6.35mm)

Do not cut the water line. Gently separate it from the coupler.

Removing the freezer door

A few things to mention fi rst.

•Make sure that you lift the door straight up so the hinges are not bent or broken.

•Be careful not to pinch the water tubing and wire harness on the door.

•Place doors on a protected surface to prevent

scratching or damage.

1.With the Freezer door closed, remove the upper hinge cover 1 using a screwdriver, and then disconnect the wires by gently pulling them apart

2.

4

3

5

Be careful not to miss the parts of refrigerator.

3.Next, remove the door from the lower hinge 6 by carefully lifting the door straight up 7 .

1

2

7

- on some models

2.Remove hinge screws 3 and the ground screw 4 by turning counter-clockwise, and take off the

upper hinge 5 . Be careful that the door does not fall on you as you are removing it.

6

Be careful not to pinch the water tubing and wire harness on the door.

4.Remove the lower hinge 8 from the bracket 9 by gently lifting the lower hinge upwards.

8

9

08_ setting up

DA99-01745A-28.indd 08 14. 10. 10. ￿￿ 10:57