Operations
Control panel
02 | 08 |
|
01
09
03 | 04 | 05 | 06 | 07 |
01 Cycle Selector | Turn the dial to select a cycle. | ||
|
| ||
02 Display | The display shows current cycle information and estimated time | ||
remaining, or an information code when a problem occurs. | |||
| |||
|
| ||
03 Temp. | Press to change the water temperature for the current cycle. | ||
|
| ||
| Press to change the spinning speed for the current cycle. | ||
| • | Rinse Hold : The final rinse process is suspended so that the | |
|
| laundry remains in the water. To unload the laundry, run a | |
|
| drain or spin process. | |
| • | No Spin : The drum does not rotate after the final drain | |
04 Spin |
| process. | |
| • | Spin Only : To run the Spin Only cycle, press Spin for 3 | |
|
| seconds. When the cycle time and spinning speed appear, press | |
|
| Spin repeatedly until a desired spinning speed is selected. Then, | |
|
| press Start/Pause to start the cycle. The spinning time depends | |
|
| on the selected cycle. | |
|
| ||
| Press to select an option from Super Rinse+, Intensive, and Pre | ||
05 Options | Wash. Press again to deselect. | ||
| • Availability of the options depends on the cycle. | ||
|
| ||
| Delay End lets you set the end time of the current cycle. Based | ||
| on your settings, the start time of the cycle will be determined | ||
06 Delay End | by the machine’s internal logic. For example, this setting is useful | ||
for programming your machine to finish a wash at the time you | |||
| |||
| normally return home from work. | ||
| • Press to choose a preset unit of hours. | ||
|
|
| |
Operations
English 31
3/24/2017 4:41:50 PM