Code |
| Action | |
|
| ||
| Spinning does not work. | ||
| • Make sure laundry is spread out evenly. | ||
| • | Make sure the washing machine is on a flat, stable surface. | |
Ub | • | Redistribute the load. If only one item of clothing needs | |
|
| washing, such as a bathrobe or pair of jeans, the final spin | |
|
| result might be unsatisfactory, and an “Ub” check message | |
|
| will be shown in the display. | |
|
| ||
| Check the motor for operation. | ||
3C | • Try restarting the cycle. | ||
• If the information code remains, contact a customer service | |||
| |||
|
| centre. | |
|
| ||
| The electronic control needs to be checked. | ||
| • Check if power is supplied properly. | ||
| • If the information code remains, contact a customer service | ||
UC |
| centre. | |
|
| ||
Low voltage detected. | |||
| |||
| • Check if the power cord is plugged in. | ||
| • If the information code remains, contact a customer service | ||
|
| centre. | |
|
| ||
| High temperature heating check. | ||
HC | • | If the information code remains, contact a customer service | |
|
| centre. | |
|
| ||
| The Water Level sensor is not working properly. | ||
1C | • Turn the machine off, and restart the cycle. | ||
• If the information code remains, contact a customer service | |||
| |||
|
| centre. | |
|
| ||
| Check communications between main and sub PBAs. | ||
AC | • Turn the machine off, and restart the cycle. | ||
• If the information code remains, contact a customer service | |||
| |||
|
| centre. | |
|
| ||
| The MEMS sensor is not working properly. | ||
8C | • Turn the machine off, and restart the cycle. | ||
• If the information code remains, contact a local Samsung | |||
| |||
|
| service centre. | |
|
|
| |
Troubleshooting
English 51
3/24/2017 4:41:54 PM