Samsung MM-C330/XER manual Setting the Clock, Press PROGRAM/SET, Press the Tuning button

DEMO/DIMMER function

ENG

All functions available on the system can be viewed on the display and the display's brightness can be switched between "on" and "off".

1	Press the DEMO/DIMMER button.
	Result: All functions available on the system appear on the front
	panel display.
	Each of these are explained in detail in this guide. Please refer to the
	relevant section.
2	Press the DEMO/DIMMER button.
	Result: The Dimmer function is selected and the display darkens.
3	Press the DEMO/DIMMER button once again to brighten the front
	panel display.

A display brightness control can only be performed while the system power is on.

1,2,3

Setting the Clock

Your system is equipped with a clock which allows you to turn your system on and off automatically.

You should set the clock:

When you first purchase the micro-compact system

After a power failure

After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing POWER.
2	Press TIMER/CLOCK twice.
3	Result: CLOCK is displayed.
	Press PROGRAM/SET.
	Result: The hour flashes.
4
	To...	Press the TUNING button
	Increase the hours
	Decrease the hours
5	When the correct hour is displayed, press PROGRAM/SET.
	Result: The minutes flash.
6
	To...	Press the TUNING button
	Increase the minutes
	Decrease the minutes

7 When the correct time is displayed, press PROGRAM/SET.

You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.

You can also use	,	buttons on the main unit to instead of
TUNING button	or	in step 4, 6.

2

3,5,7

4,6

4,6

FUNC4,6. 4,6

1

8