Selecting the Automatic Operating Mode
You can start the air conditioner in Auto mode from your remote control. In the Auto mode, the cooling operation is selected automatically. You can also raise or lower the temperature but not the fan speed.
1If necessary, press the 
button.
Result:
IMPORTANT
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected when the unit was last used.
The indoor unit beeps.
The air conditioner is fitted with protection mechanism to prevent the unit from being damaged when it is started immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2If the 
is not displayed at the top of the remote control,
press the 
button on the remote control one or more times until it appears.
Result: The indoor unit beeps each time you press the 
button.
The air conditioner runs in the Auto mode.
Note You can change modes at any time.
3To adjust the temperature, press the 
button one or more times until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result: | Each time you press the |
| button: |
|
-The temperature is adjusted by 1°C
-The indoor unit beeps