Cleaning Air Filter on Your Air Conditioner

Themode creates strong purified zone by decomposing harmful particles in the behavior of active hydrogen(H) and oxygen ion(O₂).

Themode can be selected whether the air conditioner is turned on or not.

1Press the button.

The air conditioner starts up in -Auto mode automatically.

Themode also runs when the air conditioner is turned on.

By pressing the button again, themode is canceled.

2Press theto select theoperation types.

Whenever press thebutton, Auto, Silence and Rapid will appear repeatedly.

Auto: Controls the fan speed automatically

Silence: Purifies the indoor air with silence

Rapid: Purifies the indoor air quickly

Note

 If

mode is turned on when the air conditioner runs,

-You cannot select theoperation types by pressing

the button. Themode runs only in Auto.

-Themode will also stop by pressing the Power button of the panel.

: Micro Plasma Ion

For the best use of your air conditioner, you must clean it every 2 weeks regularly to remove the dust that accumulates on the air filter.

CAUTION Before cleaning your air conditioner, ensure that you have switched off the breaker used for the unit.

1Open the front panel by pulling tabs on the lower right and left sides of the indoor unit.

2Detach the front panel by pulling it forwards.

3Hold the edge of the air filter under the front panel and pull to release.

4Remove all dust on the air filter with a vacuum cleaner or brush.

5When you finish, insert the top of the filter into the slot and fix it to 5 tabs or 3 tabs of the grille.

6Clean the front panel with a damp cloth and mild detergent (do NOT use benzene, solvents or other chemicals).

7Reassemble the air filter and the front panel.

Note If you have not used the air conditioner for a while, select the Fan mode for 3 to 4 hours to dry the inside of the air conditioner.

Hook

E-25

VIVACE_Inv_CIS_DB98-27328A_IB_E.indd 25

2007-2-24 16:53:47