PVI Industries PV 6452 1/04 instruction

Low NOx TURBOPOWER® ▪ PACKAGED WATER HEATER

NICKELSHIELD® NICKEL-PLATED STORAGE TANK

FOR INPUTS OF 800,000 AND 1,200,000 Btu/h

STANDARD FEATURES AND EQUIPMENT

•SCAQMD certified NOx emissions of <30 ppm

•NICKELSHIELD® nickel-plated tank with 10-year warranty

•Three-year TURBOPOWER® heat exchanger warranty

•One-year cost-free service policy

•Thermal efficiency of 83% per ANSI Z21.10.3

•Removable TURBOPOWER® heat exchanger with non- ferrous waterside construction and solid copper fire tubes

•100% submerged combustion

•TURBOPOWER® heat exchanger ASME rated for 150 psi operating pressure

•Removable and replaceable, cast bronze tank fittings

•23" diameter tank access

•Fan-assisted burner

•Second main gas valve

•Electronic flame safeguard with pre- and post-purge

•Metal fiber matrix burner with fuel /air ratio system

•Low gas pressure operation (4.5" W.C.)

•Upper and lower immersion operating thermostats (upper only on horizontal tanks of 250 gallons and less, and on vertical tanks of 125 and 250 gallons)

•Immersion temperature limiting device (high limit control)

•ASME-rated temperature and pressure relief valve

•Drain valve

•Draft regulator

•Air intake assembly for remote combustion air (requires field connection to ductwork supplied by others)

•Lifting lugs (on 400 gallon tanks and larger)

•Fiberglass insulation

•Steel jacketing with durable powder coat finish

•Factory-authorized start up

•ASHRAE 90.1- 1999 compliant for thermal efficiency and standby heat and electrical loss

•Storage tank ASME stamped for 188 psi test pressure and National Board Registered for 125 psi operating pressure

•UL Classified to ANSI Z21.10.3

•FM compliant

OPTIONAL FEATURES AND EQUIPMENT

20-year NICKELSHIELD® tank warranty

Storage tank ASME stamped for 225 psi test pressure and National Board Registered for 150 psi operating pressure Rear heat exchanger/tank access with 23" diameter (when not standard)

AGA-rated temperature and pressure relief valve(s)

3" cold water inlet and hot water outlet (standard on tanks larger than 400 gallons)

2" drain valve (standard on tanks larger than 400 gallons) Lifting lugs

Intratank circulator

(< 1000 gallon tank: 1/25 hp, 115V, 3/4 amp)

(≥ 1000 gallon tank: 1/3 hp, 115V, 8 amp)

2,500,000 Btu/h FM controls package. Adds electronic low- water cutoff, manual-reset high limit, single-try firing control and high-low gas pressure switch. (not required for FM compliance below 2,500,000 Btu/h)

IRI compliance package including motorized gas valve, double block and bleed, hi-low gas pressure switch manual- reset high limit, electronic low-water cutoff, and alarm bell (not required by IRI on inputs below 400,000 Btu/h)

Other agency compliance _____________ (consult factory)

See complete warranty and/or service policy for details

Electronic low water cutoff

Manual-reset, immersion temperature limiting device DUO-SET™ controls for dual temperature applications Dial temperature and pressure gauges

Tridicator Seven-day time clock

Digital seven-day time clock with battery backup Alarm bell with silencing switch

Stack temperature gauge

	PVI INDUSTRIES, LLC	PVI reserves the right to change
	FORT WORTH, TEXAS 76111	the design and specification
PV 6452 1/04	(800) 784-8326 ▪ (817) 335-9531 ▪ www.pvi.com	without notice.
PV 6452 1/04

PV 6452 1/04 specifications

PVI Industries has made a significant mark in the field of heating solutions, and the PV 6452 1/04 is a testament to their commitment to quality and innovation. This state-of-the-art unit combines efficiency, durability, and advanced technology to meet contemporary heating needs in residential and commercial settings.

One of the standout features of the PV 6452 1/04 is its impressive thermal efficiency. The unit is designed to maximize heat transfer, minimizing energy loss while providing consistent performance. With a high-efficiency rating, users can expect lower energy bills and a reduced carbon footprint, making it an eco-friendly option for those looking to enhance their heating systems.

The PV 6452 1/04 is equipped with advanced control technologies, allowing for precise temperature regulation. The intuitive digital display simplifies operation, making it easy for users to set their desired temperatures and monitor performance. Its sophisticated control system also enables compatibility with smart home technologies, providing users with the ability to manage their heating remotely or through integration with home automation systems.

Durability is another key characteristic of the PV 6452 1/04. Constructed from high-quality materials, this unit is engineered to withstand the rigors of daily use while ensuring longevity. PVI Industries places a strong emphasis on quality control, and the PV 6452 1/04 undergoes thorough testing to guarantee its reliability in various conditions.

Safety features are paramount in the design of the PV 6452 1/04. The unit includes multiple safety mechanisms that prevent overheating and ensure safe operation at all times. These features provide peace of mind for both homeowners and business operators, knowing that their heating solution is designed with safety as a priority.

In terms of installation and maintenance, the PV 6452 1/04 is designed with user convenience in mind. Its compact footprint allows for flexible installation options, making it suitable for a variety of spaces. Additionally, the unit requires minimal upkeep, with easy access points for routine maintenance tasks.

In summary, the PVI Industries PV 6452 1/04 is a cutting-edge heating solution that excels in efficiency, durability, and user-friendly technology. With its array of advanced features and reliable performance, it stands out as a top choice for anyone seeking a robust and efficient heating solution for their property. Whether for residential or commercial applications, the PV 6452 1/04 meets the diverse needs of today’s consumers while prioritizing sustainability and safety.