Pairing the TV to the Samsung Smart Remote
When you turn on the TV for the first time, the Samsung Smart Remote pairs to the TV automatically. If the Samsung Smart Remote does not pair to the TV automatically, point it at the remote control sensor of the TV, and then press and hold the buttons labelled and as shown in the figure on the left simultaneously for 3 seconds or more.
Installing batteries into the Samsung Smart Remote
1.Press the button at the top rear of the Samsung Smart Remote. The body will pop out slightly from the body cover.
2.Turn the remote over, and then slide the body of the remote upwards until the battery compartment is revealed.
3.If there are batteries in the remote, press the r and l buttons on both sides of the battery compartment to remove the existing batteries.
4.Insert two new batteries (1.5V AAA type) into the battery compartment making sure that the batteries' polarities (+,
5.Turn the remote over, press and hold the button on the top rear, and then slide the body of the remote down into place.
••Alkaline batteries are recommended for longer battery life.
English
English - 13