Installing the Speakers on the Tallboy Stand
02 Connections
1.Connect the Stand Pole to the Stand Bracket.
2.Insert and tighten three large screws into the three holes on the Stand Bracket as shown in the illustration.
3.Straighten the speaker wire and route it through the Stand Pole.
1 |
Stand Bracket |
Stand Pole |
2 |
3 |
4.Connect the Stand Pole to the Stand Neck and Stand Base.
Make sure all pieces are properly connected. If they are not, the stand will fall down.
4 |
Stand Neck |
Stand Base |
Stand Pole |