Samsung UE22H5610AKXRU Securing the TV to the Wall, Arrange the cables using the Cable Holder

To Avoid the TV from Falling

1.Put the screws into the clamps and firmly fasten them into the wall. Confirm that the screws have been firmly installed into the wall.

-- You may need additional material such as anchors depending on the type of wall.

-- Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

2.Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws into the TV again.

-- Screws may not be supplied with the product. In this case, please purchase screws of the following specifications.

-- Screw Specifications: For a 22 inches: M4

3.Connect the clamps fixed into the TV and the clamps fixed onto the wall with a strong cable and then tie the string tightly.

-- Install the TV close to the wall so that it does not fall backwards.

-- It is safe connecting the string so that the clamps fixed onto the wall are equal to or lower than the clamps fixed on the TV.

-- Untie the string before moving the TV.

wall