6 CLEANING THE INLET FILTER 
1 | 2 | 3 |
NOTE
: Do not allow the filter to become clogged as this may cause power reduc- tion or may damage the motor.
7 OUTLET FILTER 
1 | 2 |
- IF YOU HAVE A PROBLEM
PROBLEM | CAUSE | REMEDY 0 |
Motor does not start. | No power supply. | Check cable, plug and socket. |
| Thermal | Leave to cool. |
|
|
|
Suction force is gradually | Nozzle, suction hose or tube | Remove the object and |
decreasing. | is blocked. | empty/wash cassette filter as |
|
| required. |
|
|
|
Cord does not rewind fully. | Check that the cord is not | Pull the cord out |
| twisted or wound unevenly. | push down the cord rewind |
|
| button. |
Vacuum cleaner does not | Crack or hole in hose. | Check hose and replace if |
pick up dirt. |
| required. |
|
|
|
This Vacuum cleaner is approved the following.
EMC Directive : 89/336/EEC , 92/31/EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC