Marley Engineered Products 994 specification

CAUTION !

1.Before attaching the ceiling fan to an outlet box with a hanger bracket, be sure that the outlet box is fastened securely to the ceiling supports.

2.Check to be sure that the outlet box is marked as “ACCEPTABLE FOR FAN SUPPORT”. (Marley Engineered Products Model 925 HANG-SAFETMOutlet Box is U.L. Listed for this purpose. U.S. Patent Number 4,788,383.)

3.The outlet box and ceiling support should be checked to be sure that it will support at least 50 lbs. of load.

4.Electrical connections and circuit wiring should be in accordance with the National Electrical Code and/or all local codes that may apply.

5.If you are unfamiliar with electrical circuitry, acquire the services of a qualified electrician.

6.If a light kit is to be installed to the fan, add the combined light fixture wattage to the fan wattage to determine the total wattage rating of the installation.

7.After installation, blades must be a minimum of seven (7) feet above the floor. Do not install on ceilings less than eight

(8) feet high.

8.Do not use this product in a corrosive or explosive atmosphere.

9.The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care are factors which cannot be built into any product. These factors must be supplied by the person(s) caring for and operating the unit.

INSTALLING FAN BALL HANGER MOUNTING BRACKET

See Chart 1 for approximate weight for each model of fan. This weight factor, coupled with the slight fan gyration that can occur during operation, requires that a strong ceiling support be provided for attaching the hanger bracket supplied. Refer to Fig. 1 for installation. Secure mounting bracket accordingly.

1.Check to be sure the electrical outlet box is mounted to the ceiling securely and that it is marked “acceptable for ceiling fan support.” (Marley Engineered Products Model 925 Hang-SafeTMOutlet Box is U.L. Listed for this purpose.) If the outlet box is loose, secure it.

2.Position the slotted holes in the ball hanger bracket feet to allow the threaded bolts of the installed Model 925 Outlet Box through them. (See Fig. 1.) Thread the locknuts provided with the Marley Engineered Products Model 925 onto the threaded bolts and tighten securely. Make sure the ball hanger bracket is snugly and securely mounted to the outlet box after tightening the locknuts.

Some outlet boxes that are acceptable for fan support (other than Marley Engineered Products Model 925) use screws to fasten the fan mounting bracket to them. This type of outlet box will require following these general instructions for installation of the ball hanger bracket to the outlet box.

A.Check to be sure the outlet box is securely mounted to the ceiling and marked “acceptable for ceiling fan support.”

B.Align the slotted holes in the ball hanger bracket with the fan mounting holes in the outlet box.

C.Secure the ball hanger bracket to the outlet box using the two screws provided in the fan’s hardware bag.

CAUTION !

1.To reduce the risk of personal injury, use only the two steel screws (and lock washers) provided with the fan for mounting to the outlet box.

2.Some outlet boxes acceptable for fan support may not require the use of these screws due to the uniqueness of their design. Consult their accom- panying instruction sheet for ball hanger bracket installation instructions if the above methods do not apply.

REINFORCED OUTLET

BOX (MODEL 925 HANG

CEILINGSAFETM ) MATERIAL

CONSTRUCTION

MEMBER

FIELD

SUPPLY

WIRING

FIG. 1

BALL

HANGER

BRACKET

CANOPY

MOUNTING

OUTLET BOXSCREWS HANGER BRACKET

LOCK NUTS

GROUND

WIRE

BALL

HANGER

BALL HANGER

DOWNROD

NOTE: LEADS FROM FAN SHOULD PASS

THROUGH DOWNROD AS SHOWN

— 2 —

994 specifications

Marley Engineered Products 994 is an innovative solution in the market for heating, ventilation, and air conditioning (HVAC) systems. Designed with cutting-edge technology and efficiency in mind, the 994 model is particularly recognized for its ability to provide reliable and uniform temperature control in a variety of environments.

One of the standout features of the Marley 994 is its fan-assisted convective heating design, which allows for quick and effective heat distribution throughout a space. This model is equipped with a high-performance fan that operates quietly and efficiently, significantly improving comfort levels in both residential and commercial settings. The fan's adjustable speed settings enable users to optimize airflow according to specific heating needs, making it a versatile choice for various applications.

In terms of technology, the Marley 994 incorporates advanced controls that enhance usability and efficiency. Its digital thermostat offers precise temperature management, allowing users to set and maintain their desired comfort levels effortlessly. The programmable timer feature provides added convenience, enabling users to schedule heating operations around their routine, thus saving energy and reducing operational costs.

The construction quality of the Marley 994 is another characteristic that sets it apart. It's designed with rugged materials to ensure durability and long-lasting performance, even in demanding environments. The unit is also lightweight and compact, which simplifies installation and integration into existing HVAC systems.

Moreover, the Marley 994 is engineered with safety in mind. It includes a variety of safety features, such as overheating protection and automatic shut-off mechanisms, to prevent accidents and ensure reliability during operation. This commitment to safety enhances its appeal for both homeowners and commercial facility managers.

Energy efficiency is a hallmark of the Marley 994, as it conforms to the latest energy standards and regulations. This model provides significant energy savings, which not only benefits users financially but also supports sustainability efforts.

Overall, Marley Engineered Products 994 combines high-performance heating capabilities with advanced technology, durable construction, and safety features, making it an exceptional choice for those seeking effective HVAC solutions. Its versatility and efficiency make it suitable for a wide range of applications, ensuring reliable comfort no matter the setting. As the demand for efficient heating solutions continues to rise, the Marley 994 stands out as a leader in the industry.