Marley Engineered Products E3809-1325HFD Operation, Maintenance, Lubrication, Cleaning

Page 4

1.After power has been connected to unit, fans will start in either preset (high/low) speed selection.

2.Air velocity is controlled by selection of high or low speed indicator. This feature allows the setting of air velocity to individual desired performance and energy efficiency.

3.Air direction at outlet can be controlled by adjustable vanes at the nozzle which compensates for possible draft conditions.

Figure 6 - Desired Air Flow Adjustment for Temperature and Humidity Control.

Operation

NOTE: Air direction settings shown in Figures 6 & 7.

NOTE: Cold air will try to escape near floor level. Warm air will try to penetrate curtain near top of doorway. Air flow can be controlled by direction of nozzle louvers and by high/low settings.

4.For multiple unit applications (wide openings), mount units a minimum of 3” apart to allow for proper air intake and discharge.

Figure 7 - Desired Air Flow Adjustment for Insect and Dust Control.

Maintenance

WARNING: ALL ELECTRIC POWER MUST BE DISCONNECTED WHEN INSTALLING OR SERVICING THIS EQUIPMENT. MORE THAN ONE DISCONNECT SWITCH MAY BE REQUIRED TO REMOVE POWER FROM THE UNIT.

LUBRICATION

Ball bearings are permanently lubricated and require no further lubrication.

CLEANING

1.The air door cabinet may be wiped off with a damp cloth. Do not allow motor to get wet. Do not use sol- vents or harsh detergents.

NOTE: Keep air intake louvers clear of dirt and dust accumulation which could affect performance.

2.Check blower wheels for accumulated dirt twice a year and clean. If disassembly is required, see GENERAL SERVICING section.

GENERAL SERVICING

WARNING: IF SERVICING IS REQUIRED, IT SHOULD BE DONE BY QUALIFIED PERSONS ONLY.

WARNING: ALWAYS DISCONNECT POWER SUPPLY BEFORE SERVICING.

1.To remove motor/blower heater assembly, repeat Steps 4, 5 and 6 in Unpacking section.

2.Place motor/blower assembly on workbench.

3.To replace blower wheel, remove the three slotted hex head screws on outer blower ring assembly (See Figure 8, Replacement Parts Illustration.) The wheel is held onto shaft by two hex head screws.

NOTE: To re-assemble repeat steps 4 & 5 in installation section page 3.

IMPORTANT: NOTE POSITION OR WHEELS TO PREVENT RUBBING WHEN REPLACED.

4.To remove motor:

a.Remove blower wheels. (See Step 3 above.)

b.Remove blower scrolI (six hex head screws).

c.Unscrew and remove motor mounts.

5.Replace motor/blower assembly

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Specifications and Performance DescriptionModel Heater Motor Number Voltage Watts BTU/HR AmpsGeneral Safety Information UnpackingInstallation Maintenance CleaningOperation LubricationTroubleshooting Chart Symptom Possible Causes Corrective ActionReplacement Parts Replacement Parts List For Air Curtain Cabinets Replacement Parts List For Heater UnitsKey DescriptionHOW to Order Repair Parts Order to obtain any needed repair or replacement

E4806-1325HFD, E3606-1325HFD, E6006-2325HFD, E4209-1325HFD, E6009-2325HFD specifications

Marley Engineered Products is a recognized leader in the field of air movement and ventilation solutions. Their range of industrial fans and blowers delivers efficient cooling and heating solutions for various applications. Among their popular offerings are the E4206-1325HFD, E3806-1325HFD, E3809-1325HFD, E4806-1325HFD, and E4209-1325HFD models, each with distinctive features and technologies that cater to diverse operational needs.

The E4206-1325HFD fan is notable for its high-efficiency design, capable of delivering superior airflow while minimizing energy consumption. It incorporates a robust motor that ensures consistent performance in demanding environments. The design includes a corrosion-resistant housing, ensuring longevity even in challenging conditions, making it ideal for industrial applications.

On the other hand, the E3806-1325HFD model focuses on versatility and comes equipped with advanced sound-dampening technology. This feature ensures quieter operation, which is crucial for facilities where noise reduction is a priority. Additionally, this model is engineered for easy maintenance, with accessible components allowing for quick servicing without extensive downtime.

The E3809-1325HFD model stands out in terms of airflow capacity, delivering high volumes of air while remaining energy-efficient. Its aerodynamic blade design optimizes performance, ensuring that air is moved effectively across large spaces. This model is perfect for warehouses and manufacturing facilities that require powerful airflow to maintain optimal temperatures.

Moving on, the E4806-1325HFD is particularly recognized for its high-performance capabilities under extreme conditions. It features an advanced motor that operates efficiently at high speeds, ensuring robust airflow while remaining energy efficient. The fan's durable construction withstands harsh environments, making it suitable for industrial applications.

Lastly, the E4209-1325HFD combines multiple technologies to enhance its performance. It features a multi-speed motor, allowing users to adjust airflow based on specific requirements. This flexibility improves energy efficiency and operational effectiveness in varying scenarios. The fan’s compact design ensures it can be utilized in tight spaces without compromising performance.

In summary, Marley Engineered Products offers these fans as part of their commitment to quality, efficiency, and innovation. Each model is designed with distinct technologies and characteristics that address a wide array of heating and cooling needs across different industries.
Top Page Image Contents