Morphy Richards Steam cleaner instruction

70530 Rev 4 2/6/04 2:53 PM Page 1

Steam cleaner with attachments

Please read and keep these instructions

getting the best from your

new steam cleaner...

• Quick start

1Fill the tank up to a maximum of 1.4 litres of water (using warm water and less water will reduce heat-up time). Screw cap on and tighten fully.

2Attach the required accessories.

3Connect to the power supply.

4Press the on/off button to start heat-up. When orange light turns off, the steam is ready.

5Press the trigger on the handle to release the steam.

6Aim the steam safely: Note at the start water may be ejected. Hold over a sink or bucket until excess water has cleared.

• Descale

Descale regularly, do not wait for a problem to occur. In very hard water areas we recommend using distilled water. See page 10 for descaling instructions.