70530 Rev 4 2/6/04 2:53 PM Page 7
Attaching tubes & handle
WARNING: Unplug the unit and allow to cool before fitting or changing attachments as they become hot during use.
Attach the desired accessory to the hose handle, extension tubes can be attached to the handle for extra reach.
1Push the extension tubes onto the connection nozzle as far as it will go until you hear a click.
Some tasks may be easier with only one, tube fitted or non at all.
2To connect the desired accessory directly to the steam handle, slide the handle into the accessory head or tube until it locks in place.
Floor nozzle
The floor nozzle is used for the cleaning of large, washable wall and floor areas. The floor nozzle can be used with or without the cloth cover.
•Sensitive surfaces, wood, linoleum etc. should be used with the cloth. IMPORTANT: When steaming sensitive
surfaces including carpets ensure the brushes on the floor nozzle are retracted.
1Fit the elbow attachment to the floor nozzle and twist 1/2 a turn.
2Fit the floor nozzle to the extension tube or handle.
3To fit the cloth to the floor nozzle pull the cloth under the clips on both sides. Extra cloths can be ordered by using our helpline. Alternatively any strong, uncoloured cotton cloths may be used.
•For cleaning stubborn dirt on less sensitive surfaces, the brush fitting can be extended by turning the dial anti- clockwise.
7