Accessing the floor nozzle, Helpline

73281 rev1 13/3/08 16:22 Page 7

Accessing the floor nozzle

1Disconnect the cleaner from the mains supply.

2Press the handle release pedal and place the cleaner face down on a soft surface, eg. carpet.

3Remove the four screws holding the two undercarriage plates ö in position. Remove the plates P.

4Lift up the undercarriage ÷ and unclip from it’s location Q.

5Underneath the undercarriage is the height adjustment cam. In the centre of the cam is a screw, remove this screw R.

6Next, remove the four remaining floor nozzle screws ø, two located by the rear wheels and two halfway along the floor nozzle S.

7Turn the product over and pull off the height adjustment knob.

8Lift the rear of the floor nozzle cover and unclip from the front. Put safely to one side T.

Refitting the floor nozzle cover

1Hook the front of the cover into the floor nozzle, then lower the rear of the cover. Note: it may be necessary to lift the upright portion of the product to allow the cover to fully close.

2Refit the four main screws.

3Turn the product over and check that the front of the cover is fully closed.

4Insert the height adjustment knob, carefully turning it until it locates into the mating keyway on the cam.

5Turn the product back over and locate the screw into the centre of the cam and tighten.

6Clip the undercarriage into location and close into position.

7Re-fit the two undercarriage plates and tighten the four screws.

Return the cleaner to the upright position. Connect to the mains supply and switch on to test.

Removing and re-fitting the rotating brush bar & belt

1Lift out the belt cover ù U.

2Gently lever out the right hand side of the brush-bar, followed by the left hand side V.

3To re-fit, thread the brush-bar through the belt. Place the left hand side of the brush-bar into location, then place the belt around the motor shaft. Pull the brush-bar forwards (stretching the belt) and locate the right hand side of the brush-bar.

4IMPORTANT: Make sure both ends of the brush-bar are fully and correctly located, and the belt is not trapped. The brush-bar should be able to be rotated by hand.

5Re-fit the belt cover carefully, noting it’s location.

HELPLINE

If you have any difficulty with your appliance, do not hesitate to call us.

We are more likely to be able to help than the store from where you bought it.

Please have the following information ready to enable our staff to deal with your query quickly.

•Name of the product

•Model number as shown on the rear of the appliance.

•Serial number as shown on the rating label.

UK Helpline	0844 871 0949
Replacement Parts	0844 873 0715
Ireland Helpline	1800 409 119

www.morphyrichards.com

ô õ

73281 specifications

The Morphy Richards 73281 is a versatile and powerful kettle designed for those who prioritize efficiency and style in their kitchen appliances. With a sleek and modern design, the kettle not only complements contemporary kitchen aesthetics but also offers a range of features that enhance its usability.

One standout feature of the Morphy Richards 73281 is its rapid boil technology. This kettle is specifically engineered to boil water quickly, making it ideal for busy households where time is of the essence. The powerful 3000-watt heating element ensures that you can enjoy a hot cup of tea or coffee in no time, drastically reducing waiting time.

The kettle boasts a generous 1.7-liter capacity, allowing users to prepare multiple cups of hot beverages in one go. Whether it's for family gatherings or entertaining guests, this capacity is a significant advantage, saving both time and energy. The large water window with a clear measurement scale is another thoughtful design consideration, enabling users to easily gauge the water level and ensure they are filling the kettle to the right amount.

Safety is a top priority, and the Morphy Richards 73281 includes several features to prevent accidents. The automatic shut-off function activates once the water has reached boiling point, preventing dry boiling and potential damage to the kettle. Additionally, the 360-degree swivel base allows for easy placement and accessibility, making it convenient for both right-handed and left-handed users.

The kettle is also designed with a removable, washable filter that helps to keep the water clean from limescale deposits. This feature not only enhances the taste of your beverages but also extends the kettle's lifespan, ensuring users enjoy high performance for longer.

In terms of convenience, the Morphy Richards 73281 comes with a cord storage feature, allowing for a tidy countertop without nuisance cords getting in the way. Moreover, the ergonomic handle is designed for a comfortable grip, ensuring that pouring is safe and easy.

Overall, the Morphy Richards 73281 is a combination of style, efficiency, and safety, making it an excellent addition to any kitchen for anyone who enjoys quick and reliable hot water at their fingertips.