QSTD2400 Series DVR User’s Manual
The Rear Panel Layout for 4 Channel DVR is shown as Fig 2.4 Rear 4Ch.
Fig 2.6 Rear Panel for
| Name | Description |
|
|
|
1 | Video in | Video input channels from |
2 | Video out | Connect to monitor |
3 | ||
4 | Audio out | Audio output, connect to the Speaker |
5 | Audio in | Audio input |
6 | PS/2 port | Connection for PS/2 mouse |
8 | USB MOUSE | Connection for USB mouse |
9 | RJ45 PORT | Connect to router for network/internet access |
10 | VGA port | VGA output, connect to monitor |
11 | COM port | For debugging or serial input |
|
| External sensor input |
12 | ALARM IN/OUT | external alarm. Please refer to 2.3.2 Installing Sensor |
|
| Alarm |
13 | Power | Power on/off |
14 | Loop out | For outputting each channel’s image independently |
15 | Connect to eSATA HDD for backup |
Tab 2.4 4 Channel Rear Panel Layout
Notice: The resolution of VGA output is 800*600/60Hz. If connected through VGA port, please assure your display supports the display mode. (For most of LCD screens, they can adapt to it automatically without manual adjustment)