Samsung SCC-B1310P manual Eng

Page 3

3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat generation or fire.

4. Securely plug the power cord into the power receptacle. Insecure connection may cause fire.

5. When installing the camera, fasten it securely and firmly. The fall of camera may cause personal injury.

6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects.

7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.

8. If any unusual smells or smoke come from the unit, stop using the product.

In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fire or electric shock.

9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.)

10. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock.

11. This installation should be made by a qualified service person and should conform to all local codes.

CAUTION

1. Do not drop objects on the product or apply strong blows to it.

Keep away from a location subject to excessive vibration or magnetic interference.

2. Do not install in a location subject to high temperature (over 122°F), low temperature (below 14°F), or high humidity. Doing so may cause fire or electric shock.

3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

ENG

Image 3
Contents Digital Color Camera Fire, electric shock, or damage to the product Safety precautionsENG IC Compliance Notice FCC StatementImportant safety instructions Contents Overview What is Color Rolling?Resolution FeaturesMount Adaptor Holes InstallationPackage Parts & DescriptionConnect the auto iris lens connector Things to keep in mind during installation and UseLens with zooming feature Install the lensAdjust the back focus Lens without zooming featureConnect the cables and check the operation Power Indication LED Power PortFunction SWITCH-1 Video Out Port Function SWITCH-2Assemble the parts ENG Camera grounding Installing a lightening conductorSpecifications Memo AB82-02387A
Related manuals
Manual 182 pages 24.66 Kb