3Auto Iris Lens Connector
Provides power source and control/ DC signal with iris lens that are required to control the iris of the lens
4Flange Back Adjustable Ring
Used to adjust the back focus of the camera.
5Auto Iris Lens Control Cable
Transfers the control signal from the camera to the iris lens.
Things to keep in mind during installation and Use
•Do not disassemble the camera on your own.
•Always be careful when handling the camera. Do not strike the camera by your fists or shake it. Please be careful not to be careless when storing and operating it.
•Do not place or operate the camera in any wet environment such as rain or wet surfaces.
•Do not clean the camera with rough sandpaper. Please always use a dry cloth when cleaning it.
•Put the camera in a cool area free from direct sunlight. Otherwise, the camera may be dam- aged.
Connect the auto iris lens connector
Remove the sheath round the iris control cable and connect it to each of the auto iris lens connector as described below.
Rib
Pin3
Pin1
Pin4
Pin2
Pin Number | DC Control Type |
1
2Damp(+)
3Drive(+)
4
※This connector is not provided.
10