Monessen Hearth M400BFC manual Chimney Components, Component Description Model Number

M400BFC Balanced Flue Heat-Circulating Fireplace

Chimney Components

Component	Description	Model Number
Chimney Support	Used to support chimney for each of	TCS8A
	30’ vertical height and 6’ of angled chimney run	(8” flue)
Firestop	Required at each floor level and attic on	FS2A (8” straight flue)
	multi-story installation	FS6A (8” 30° inclined flue)
Attic Insulation Shield	Required in Canada	FS2100HT
Traditional Top Housing	Top housing of simulated brick pattern	T20B
	available in red, tan or white. Appropriate	(single flue)
	adapter is required (8CA). Flashing included.	TL20B
		(extra tall single flue)
Housing Extension	Extends Traditional Top Housing on	202036
	steep pitched roofs	(single flue)
Contemporary Chase Top	Used to terminate chimney at the top of a
Termination	chase. Flashing is not included.	TT200C
	Adapter Kit (TT8CB) is required.
Chase Top Housing	Used with chase terminations to prevent rain entry.	FL88
		(8” flue)
Contemporary Flashing		8-6-12 with 8” flue
	Required for Contemporary Round Top	0 to 6/12 pitch
	termination to prevent rain entry.	8-12-12 with 8” flue
		(6/12 to 12/12 pitch)
Chimney Sections		8” flue
		81 (1’ long)
	Used to build chimney systems.	818 (1¹⁄₂’ long)
		83 (3’ long)
		84 (4’ long)
Chimney Elbows	Used to develop offset chimney systems.
	Only 30° elbows are available. (Elbows	830A-2
	packed 2 per carton - upper and lower	(8” 30° flue)
	elbow set.)
Round Top Termination	Used to terminate chimney on the roof.	RT8C
	Flashing not included.	(8” flue)
Extended Round Top Chase	Used to terminate chimney at the top of a	RT8CL
Termination	chase. Adapter Kit included. Flashing not	(8” flue)
	included.
Adapter Kit	Required to connect triple-wall chimney	8CA
	with Traditional Top Housing (T20B or TL20B)	(8” flue)
Adapter Kit	Required to unite chimney with	TT8CB
	Contemporary Chase Top. (TT200C)

22 87D1505